Pass D-PSC-MN-01 Exam Latest Practice Questions Updated on Sep 20, 2025 [Q41-Q61]

4.5/5 - (2 votes)

Pass D-PSC-MN-01 Exam Latest Practice Questions Updated on Sep 20, 2025

EMC D-PSC-MN-01 Study Guide Archives

Q41. What step should be performed when testing connectivity between a Dell EMC PowerScale cluster and an NFS client?

Map a drive to the default IFS share on the cluster

Ping the DNS server used by the cluster from PuTTY

Create an NFS export and mount it on the NFS client

In a Web browser, type the cluster name and press Enter

Q42. Which tool is essential for completing a PowerScale cluster configuration that is compliant with specific industry standards?

A compliance benchmarking tool

A network configuration utility

A hardware compatibility checker

A storage capacity planning tool

Q43. Which document was replaced by the PEQ?

Site Preparation and Planning Guide

Web Administration Guide

Supportability and Compatibility Guide

Configuration Guide

Q44. What can be viewed using the isi_upgrade_logs _s command?

Post upgrade errors

Current upgrade state

Active upgrade errors

Upgrade assessment results

Q45. In PowerScale hardware maintenance, why is it essential to track the installation and maintenance of FRUs?

To maintain a detailed inventory for audit purposes

To ensure optimal data placement within the cluster

To facilitate future software upgrades

To provide a history for troubleshooting and diagnostics

Q46. A platform engineer is cabling a large Dell PowerScale cluster of 24 H600 nodes using the Leaf- Spine topology for the back-end network.
What is a characteristic of this topology?

Cluster nodes connect to spine switches, which communicate with each other via leaf switches

Cluster nodes connect to leaf switches, which communicate with each other via spine switches

All spine switches are interconnected

All leaf switches are interconnected

Q47. What considerations should be made when applying upgrades or patches to a PowerScale cluster?

Ensuring compatibility with existing applications

Backing up configuration and data

Verifying the integrity of the upgrade package

All of the above

Q48. During a PowerScale cluster expansion, what factors must be considered to maintain balance?

Network throughput and latency

Storage and compute node ratios

Data distribution and redundancy settings

Power and cooling requirements

Q49. In the context of PowerScale hardware installation, why is it essential to verify the firmware version of each node?

To confirm that all nodes will operate at the same performance level

To ensure compatibility with the cluster’s existing nodes

To facilitate integration with third-party applications

To comply with data security regulations

Q50. What type of NIC is used for the external network on a Dell PowerScale F200 node?

Dual port 10/25 GbE or dual port 40/100 GbE

Single port 10 GbE or dual port 25/40 GbE

Dual port 10/40 GbE or single port 100GbE

Dual port 10/100 GbE

Q51. A platform engineer is creating a Dell PowerScale cluster that must meet SEC 17a-4f rules. Node 1 is powered on and cabled.
What action must be taken to meet the requirement?

Create a cluster.

Reboot into SmartLock Compliance mode.

Activate the Enterprise Security mode license.

Call Dell Tech Support to configure the cluster manually.

Q52. Which two backend switches support 100 GbE?

DCS-7308

S5232-ON

29264-ON

D4040

Q53. What preparatory action is necessary to facilitate effective troubleshooting during and after PowerScale rack installation?

Creating a detailed network diagram

Setting up a temporary command center near the rack

Ensuring all tools and spare components are available on-site

Photographing each phase of the installation for reference

Q54. A platform engineer is tasked with adding F600 nodes to an existing Dell EMC PowerScale cluster. After racking and stacking the F600 nodes, they determine that the cluster contains X210 and H400 nodes.
What should the platform engineer consider?

H400 nodes cannot co-exist with the F600 nodes in the same cluster

The F600 must use InfiniBand for internal network communication

F600 nodes cannot co-exist with X210 nodes in the same cluster

The cluster must be upgraded to Ethernet back-end topology

Q55. A client plans to reconnect to a cluster automatically without Interruption.
Which two upgrade methods can be used to complete the upgrade while file service is still available to the client?

Parallel upgrades

Simultaneous upgrades

Rolling upgrades

Automated upgrades

Q56. Which components are considered key Field Replaceable Units (FRUs) in PowerScale nodes?
(Select two)

Hard drives

Power supplies

Cooling fans

Network cards

Q57. A platform engineer is installing a Dell PowerScale cluster with 12 F200 nodes. They are using breakout cables.
What is the speed of the back-end port of the nodes if the switchport is 100 GbE?

10 GbE

25 GbE

12.5 GbE

50 GbE

Q58. What is a critical consideration when replacing a network card, a key CRU, in a PowerScale node?

The new card has identical physical dimensions.

The card is compatible with the node’s hardware version.

The node’s operating system is reinstalled.

The card is hot-swappable.

Q59. Which of the following are necessary actions when initializing a new PowerScale cluster? (Select two)

Defining network segregation policies

Configuring the cluster’s NTP settings

Selecting the appropriate data layout scheme

Implementing role-based access control

Q60. Exhibit.

A platform engineer has connected power cables to a Dell PowerScale Gen6 node.
What does the status indicator indicate?

Not functioning

Cold and redundant

Mismatch of voltage or component firmware

On and healthy

Q61. A Dell EMC PowerScale platform engineer is asked to reimage a node.
What should they check before they start the reimage process?

The treedelete job has been run against the node.

Customer has redundant paths to their data.

Node has been SmartFailed and removed from the cluster.

SyncIQ job has been run to copy the node data.

EMC D-PSC-MN-01 Exam Syllabus Topics:

Topic	Details
Topic 1	PowerScale Hardware Installation: This section evaluates the installation capabilities of hardware engineers to test candidates on their ability to plan and execute the installation of PowerScale hardware, prepare the maintenance site, and adhere to best practices when installing racks, nodes, and related components.
Topic 2	PowerScale Hardware Maintenance: Targeted at system administrators, this section focuses on key tasks involved in maintaining PowerScale hardware. It examines candidates’ proficiency in completing initial maintenance steps, preparing nodes for operation, and processing Field Replaceable Unit (FRU) and Customer Replaceable Unit (CRU) requests.
Topic 3	PowerScale Hardware Concepts: This part of the exam assesses the expertise of IT infrastructure architects, and emphasizes the ability to differentiate between the architectural elements of PowerScale platforms, understand their specific use cases, and compare design specifications across PowerScale hardware models.
Topic 4	PowerScale Implementation: Geared towards cluster administrators, this section covers the practical aspects of implementing PowerScale systems. It focuses on creating new clusters, integrating nodes into existing clusters, and applying alternative configurations or accessories to improve performance.

D-PSC-MN-01 Questions Prepare with Learning Information: https://www.trainingquiz.com/D-PSC-MN-01-practice-quiz.html

Quiz Training Materials

Pass D-PSC-MN-01 Exam Latest Practice Questions Updated on Sep 20, 2025 [Q41-Q61]

EMC D-PSC-MN-01 Exam Syllabus Topics:

[Apr-2026] Dumps Brief Outline Of The D-PCR-DY-01 Exam – TrainingQuiz [Q116-Q136]

Get all the Information About EMC D-PST-OE-23 Exam 2026 Practice Test Questions [Q23-Q39]

Leave a Reply Cancel reply

Quiz Training Materials

Pass D-PSC-MN-01 Exam Latest Practice Questions Updated on Sep 20, 2025 [Q41-Q61]

EMC D-PSC-MN-01 Exam Syllabus Topics:

You May Also Like...

[Apr-2026] Dumps Brief Outline Of The D-PCR-DY-01 Exam – TrainingQuiz [Q116-Q136]

Get all the Information About EMC D-PST-OE-23 Exam 2026 Practice Test Questions [Q23-Q39]

Leave a Reply Cancel reply