[Q18-Q37] Verified RCNI dumps Q&As – Pass Guarantee or Full Refund [Jan-2025]

4/5 - (1 vote)

Verified RCNI dumps Q&As – Pass Guarantee or Full Refund [Jan-2025]

RCNI PDF Dumps | Jan 05, 2025 Recently Updated Questions

RUCKUS RCNI Exam Syllabus Topics:

Topic	Details
Topic 1	RUCKUS Products & Solutions: RUCKUS ICX networking Engineers are expected to showcase their knowledge of RUCKUS products and solutions in this section. It focuses primarily on the ICX product line, covering various switch models and their capabilities. Candidates should be familiar with the features, specifications, and use cases of different ICX switches.
Topic 2	Foundational Networking Concepts: This section of the exam measures the skills of RUCKUS ICX Network Administrators and covers essential networking concepts. It includes VLAN design and configuration, STP and loop prevention protocols, PoE requirements, basic LAN concepts, Layer 3 routing configurations, and basic QoS concepts. Candidates should be able to demonstrate proficiency in designing VLANs for network segmentation.
Topic 3	ICX Solution Implementation: This significant portion of the exam assesses the skills of RUCKUS ICX Network Administrators in implementing ICX solutions. It covers ICX software management, stacking capabilities, PoE configuration, Layer 2 3 protocols, and ICX services, IPv4 IPv6 addressing on switch interfaces, ICX switch management methods, and configuring multicast and security features. Candidates should be able to demonstrate proficiency in configuring stacking for scalable network deployments.
Topic 4	ICX Solution Troubleshooting: RUCKUS ICX networking Engineers are expected to demonstrate troubleshooting skills in this section. It covers basic networking troubleshooting techniques and procedures for performing ICX switch recovery. Candidates should be able to identify and resolve common network issues in ICX environments.

NO.18 Which method is required to install a feature license on an ICX running FastIron 08.0.95?

USB

CLI

TFTP

FTP

NO.19 Which two processes are used to add a new stack member to an existing stack? (Choose two.)

stack priority configuration

interactive setup

stack switchover

stack suggested-id

manual configuration

NO.20 A Core, Aggregation, Edge topology network is running Rapid Spanning Tree Protocol (RSTP). Two switches at the edge are legacy and run 802.1D.
To influence the convergence time of the legacy switches at the edge, where are the timers modified?

the route-only port on the upstream gateway

on the two legacy 802.1D switches at the edge

on the Aggregation switches connected to the legacy edge switches

on the root bridge at the core

NO.21 Why is the following command failing?
RKUS-01(config)#vlan 1
RKUS-01(config-vlan-1)#tagged ethernet 1/2/1
Invalid input -> tagged ethernet 1/2/1
Type ? for a list

This model ICX does not have an interface Ethernet 1/2/1.

The default VLAN cannot be tagged to any interfaces.

VLAN 1 must be configured as a protocol-based VLAN before tagged ports can be added.

A Virtual Ethernet interface must be defined before a tagged port can be added.

NO.22 Which two commands display license information? (Choose two.)

show inline power

show version

show who

show chassis

show license

NO.23 Which three conditions allow an ARP request or response to pass a Dynamic ARP Inspection (DAI) check?
(Choose three.)

The IP/MAC pair appear in the DHCP binding database.

A static ARP entry exists for the IP/MAC pair with the inspection flag set.

Client authenticated using MAC authentication.

Client authenticated using RADIUS on an 802.1X enabled port.

Request originated on a trusted port.

There is a static reservation for the IP/MAC pair in the DHCP pool.

NO.24 A Wi-Fi access point is configured for management traffic on the default VLAN and a guest SSID on VLAN 10. The access point is connected to port 1/1/10.
What is the correct configuration?

vlan 1
no tagged ethernet 1/1/10
!
vlan 10
untagged ethernet 1/1/10

vlan 1
no untagged ethernet 1/1/10
!
vlan 10
tagged ethernet 1/1/10

vlan 10
tagged ethernet 1/1/10

vlan 10
no untagged ethernet 1/1/10

NO.25 Which command will provide a maximum 15.4W to the connected Power over Ethernet (PoE) device?

ICX(config-if-e1000-1/1/1)#inline power power-by-class 5

ICX(config-if-e1000-1/1/1)#inline power power-by-class 2

ICX(config-if-e1000-1/1/1)#inline power power-by-class 3

ICX(config-if-e1000-1/1/1)#inline power power-by-class 4

NO.26 Which function is performed by ARP protocol?

resolve IP address to MAC address

discover directly connected neighbors

build and maintain switch MAC tables

resolve host name

NO.27 Which two commands can be used to display the IP address of a device attached to a switch port? (Choose two.)

show interface

show interface brief wide

show mac-address all

show lldp neighbor detail

show arp

NO.28 In a core/edge network topology, which ports should have Root Guard enabled?

route-only ports facing the WAN

edge ports facing the core

core ports facing the edge

management ports at the core

NO.29 Which ICX model has eight integrated QSFP28 ports?

ICX7550-48F

ICX7850-48F

ICX7650-48F

ICX7750-48F

NO.30 What is the maximum distance between ICX devices in a stack?

40 kilometers

3 meters

9 meters

1 kilometer

NO.31 Which device will become the root in the Spanning Tree election process?

the device with root guard enabled

the device with the highest IP address

the device with the lowest bridge ID

the device with the highest bridge priority value

NO.32 Which two commands can be used to display the IP address of a device attached to a switch port? (Choose two.)

show interface

show interface brief wide

show mac-address all

show lldp neighbor detail

show arp

NO.33 What is the maximum Wattage for a PoE+ interface with PoE overdrive enabled?

NO.34 When using zero-touch stacking, which two prerequisites must be in place to ensure all devices join the stack?
(Choose two.)

configure each unit’s management IP, VLANs, and tagging

enable stacking on all devices

enable stacking on the active controller

ensure units have clean configurations

issue stack disable on intended member devices

NO.35 A customer required an access switch with a Power over Ethernet (PoE) budget not to exceed 240W. They also require the switch to make no fan noise. Which ICX switch would fit these requirements?

ICX7150-C12P

ICX7150-24P

ICX7150-48P

ICX7150-C10ZP

NO.36 Which two statements are true when Dynamic Host Configuration Protocol (DHCP) Snooping is enabled? (Choose two.)

DHCP server interfaces should be trusted.

All interfaces are trusted by default.

DHCP snooping must be enabled globally.

DHCP snooping must be enabled per VLAN.

DHCP snooping must be enabled per interface.

NO.37 Based on the following configuration, which statement is true?
ICX-Router (config)# ipv6 unicast-routing
ICX-Router (config)# interface ethernet 1/3/1
ICX-Router (config-if-e1000-1/3/1)# ip address 10.172.10.1/24
ICX-Router (config-if-e1000-1/3/1)# ipv6 address 2001:db8:12d:1300::/64

The ipv6 enable command must also be configured at the interface level.

The interface will transmit and receive both IPv4 and IPv6 traffic simultaneously.

ICX devices do not support IPv4 and IPv6 addresses configured on the same interface.

ICX devices only support dual-stacked IPv4 and IPv6 configuration on a VE interface.

RCNI Exam Questions – Valid RCNI Dumps Pdf: https://www.trainingquiz.com/RCNI-practice-quiz.html

Quiz Training Materials

[Q18-Q37] Verified RCNI dumps Q&As – Pass Guarantee or Full Refund [Jan-2025]

RUCKUS RCNI Exam Syllabus Topics:

Leave a Reply Cancel reply