[2024] Valid DES-3128 test answers & EMC DES-3128 exam pdf [Q20-Q34]

Rate this post

[2024] Valid DES-3128 test answers & EMC DES-3128 exam pdf

Verified DES-3128 dumps Q&As – Pass Guarantee or Full Refund

NO.20 A backup administrator wants to configure PSS for a client to have this configuration:
3 PSS for save set ‘/data1’
5 PSS for save set ‘/data2’
How can this be achieved?

PSS:stream_ss=3,/data1; 5,/data2

PSS:streams_per_ss=3,/data1: streams_per_ss=5,/data

PSS:streams_per_ss=3,/data1, 5,/data2

PSS:streams_per_ss=3,/data1t PSS:streams

To configure PSS for a client to have 3 PSS for save set ‘/data1’ and 5 PSS for save set ‘/data2’, the administrator can use the following command:
PSS:streams_per_ss=3,/data1, 5,/data2
This command sets the number of parallel save streams (PSS) for each save set. The option “streams_per_ss” is used to specify the number of parallel save streams for each save set, and the path of the save set is specified after a comma. In this case, 3 PSS are set for the save set ‘/data1’ and 5 PSS are set for the save set ‘/data2’.

NO.21 What is true of a BMR when using NetWorker?

required when a host encounters a catastrophic failure

restores Linux operating system

restores VM operating system

can be used for recovery of NetWorker server database

NO.22 What is a part of a full backup in a Windows BMR recovery operation?

Critical volumes

Windows Roles

Windows File System

UEFI Partitions

A part of a full backup in a Windows BMR recovery operation is the critical volumes, which are the drives containing the Windows operating system, boot loader, and related system files. This is required to ensure that the system is able to boot after the recovery process is complete.

NO.23 An administrator added several new LDAP user accounts for backup configuration and monitoring tasks . The LDAP users have been authenticated in NMC.
Where must the user accounts be added so these tasks can be performed on the server?

Privileges field of the user groups on the NetWorker server

Users field of the Security Administrators group on the NetWorker server

External roles field of the user groups on the NetWorker server

Users user group on the NMC server

The LDAP user accounts must be added to the Privileges field of the user groups on the NetWorker server in order for the users to be able to perform the specified tasks on the server. The other options are not related to this process.

NO.24 A NetWorker server has a media library attached. A customer needs to back up their VMware environment using vProxy A designated pool was created for the VMware backups However, this pool is not listed in the drop-down menu during a backup action creation.
What is the cause of this behavior?

A vProxy is disabled

vProxy backups can only be directed to CloudBoost devices.

The media library is disabled.

vProxy backups can only be directed to Data Domain devices.

NO.25 Which virtual environments are supported by NetWorker to back up virtual machines?

KVM and Microsoft Hyper-V

Microsoft Hyper-V and Citrix XEN

VMware and Microsoft Hyper-V

Citrix XEN and VMware

NetWorker supports both VMware and Microsoft Hyper-V virtual environments for backing up virtual machines.

NO.26 A customer checks the rap log on a NetWorker server to audit recent resource changes, but the file is empty.
What is the cause of the issue?

The Monitor RAP attribute on a NetWorker Client is disabled.

Permission issues for the log are not set.

Permission issues for the log are set.

The Monitor RAP attribute on a NetWorker Server is disabled.

The rap log on a NetWorker server is used to audit recent resource changes, and if the file is empty, it is likely because the Monitor RAP attribute on the NetWorker server is disabled. This attribute must be enabled in order for the rap log to be updated. The other options are not related to the cause of the issue.

NO.27 A backup administrator is deploying an extended client on a Linux host. The following error is observed during the installation:
Cannot contact a portmapper on port 7937
What is the recommended action to resolve this issue?

Install the lgtoclnt-[version].rpm package and reinstall the Extended client.

Install the lgtoserv-[version] rpm package and reinstall the Extended client.

Install the lgtonode-[version].rpm package and reinstall the Extended client.

Install the Lgtobbb-[version].rpm package and reinstall the Extendd client

The error “Cannot contact a portmapper on port 7937” indicates that the portmapper service, which is required for the NetWorker Extended Client installation, is not running on the Linux host. The recommended action to resolve this issue is to install the lgtoserv-[version] rpm package and reinstall the Extended client. The other options are not related to this process.

NO.28 In a NetWorker environment, a daily scheduled backup was started. However, the volume did not mount, and the backup failed.
What is the reason for the failure?

Protection group is not selected on the pool.

Tape volumes attached to the NetWorker server are recyclable.

There are no appendable volumes that match the pool.

Volumes labeled in the required pool are appendable.

NO.29 Which event category indicates that a nonfatal error has occurred?

Warning

Alert

Notification

Information

A Warning event category indicates that a nonfatal error has occurred. The other options are not related to this process.

NO.30 What is a feature of the CloudBoost appliance?

enables the transfer of backups to cloud storage

replaces the PowerProtect DD series appliance

enables the transfer of backups to Dell EMC Cloud Tier

replaces the PowerProtect DDVE appliance

NO.31 A NetWorker server has a PowerProtect DDVE attached It is running out of space, and a customer needs to offload some data to AWS S3 What is the recommended way to perform this?

Manually copy data to AWS S3

Utilize a Dell EMC Cloud Tier feature.

Deploy a NetWorker storage node in AWS.

NO.32 A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.
What is the fastest way to resolve this issue?

Install the NetWorker Extended Client package.

Use an nsrinfo utility instead

Open a case with Dell Support

Use a Windows Explorer to find the mminfo.exe file

To use the mminfo utility, the NetWorker Extended Client package must be installed to the Windows 2019 client. This package includes the mminfo executable along with other NetWorker utilities.

NO.33 Which event category indicates that a nonfatal error has occurred?

Warning

Alert

Notification

Information

NO.34 An administrator already added a client “CLientA” This client has recently been assigned a second DNS named “ClientAB” When the backup ran, the following error is observed
“The client ClientAB is not in backup servers’ clients list.”
Use the simulator to resolve this issue

When you have finished, continue to the next question

The steps to resolve the issue of the client “ClientAB” not being in the backup server’s clients list are as follows:
Verify the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Verify that the client “ClientA” is present in the list of clients.
Verify that the client “ClientAB” is not present in the list of clients.
Update the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the ClientA.
In the Client Name field, update the name to “ClientAB”
In the Client Address field, enter the IP address or hostname of the client.
Click on the OK button to save the changes.
Re-schedule the backup
Go to the Clients tab.
Click on the ClientAB.
Go to the Schedules tab.
Remove the current schedule and create a new schedule for the client.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you need to backup.
Click on the OK button to schedule the backup.
Monitor the backup process
Monitor the backup process to ensure that it is running successfully.
Check the logs for any errors.

Loading …

EMC NetWorker is a backup and recovery solution that provides data protection for organizations of all sizes. It offers a complete backup and recovery solution for physical and virtual environments, including databases, applications, and network-attached storage (NAS) devices. The NetWorker solution is designed to ensure data availability while minimizing backup windows and reducing the risk of data loss.

DES-3128 Exam Questions – Valid DES-3128 Dumps Pdf: https://www.trainingquiz.com/DES-3128-practice-quiz.html