4.2/5 - (4 votes)

TAKE HP ACA – Network Security HPE6-A84 PRACTICE QUESTIONS FOR AMAZING RESULTS

 HP HPE6-A84 Exam Dumps Are Essential To Get Good Marks

The HP HPE6-A84 exam consists of 60 multiple-choice questions that must be completed within 90 minutes. Candidates are required to score at least 70% to pass the exam and earn the Aruba Certified Network Security Expert certification. HPE6-A84 exam is available in English and can be taken at any Pearson VUE testing center around the world. Candidates who pass the exam will be able to demonstrate their proficiency in network security using Aruba technology and will be recognized as experts in the field.

 

NEW QUESTION 18
A customer has an AOS 10-based mobility solution, which authenticates clients to Aruba ClearPass Policy Manager (CPPM). The customer has some wireless devices that support WPA2 in personal mode only.
How can you meet these devices’ needs but improve security?

 
 
 
 

NEW QUESTION 19
A customer has an AOS 10-based mobility solution, which authenticates clients to Aruba ClearPass Policy Manager (CPPM). The customer has some wireless devices that support WPA2 in personal mode only.
How can you meet these devices’ needs but improve security?

 
 
 
 

NEW QUESTION 20
Refer to the exhibit.

Which security issue is possibly indicated by this traffic capture?

 
 
 
 

NEW QUESTION 21
Refer to the scenario.
A customer has an Aruba ClearPass cluster. The customer has AOS-CX switches that implement 802.1X authentication to ClearPass Policy Manager (CPPM).
Switches are using local port-access policies.
The customer wants to start tunneling wired clients that pass user authentication only to an Aruba gateway cluster. The gateway cluster should assign these clients to the “eth-internet” role. The gateway should also handle assigning clients to their VLAN, which is VLAN 20.
The plan for the enforcement policy and profiles is shown below:

The gateway cluster has two gateways with these IP addresses:
* Gateway 1
o VLAN 4085 (system IP) = 10.20.4.21
o VLAN 20 (users) = 10.20.20.1
o VLAN 4094 (WAN) = 198.51.100.14
* Gateway 2
o VLAN 4085 (system IP) = 10.20.4.22
o VLAN 20 (users) = 10.20.20.2
o VLAN 4094 (WAN) = 198.51.100.12
* VRRP on VLAN 20 = 10.20.20.254
The customer requires high availability for the tunnels between the switches and the gateway cluster. If one gateway falls, the other gateway should take over its tunnels. Also, the switch should be able to discover the gateway cluster regardless of whether one of the gateways is in the cluster.
What is one change that you should make to the solution?

 
 
 
 

NEW QUESTION 22
Refer to the exhibit.

You have been given this certificate to install on a ClearPass server for the RADIUS/EAP and RadSec usages.
What is one issue?

 
 
 
 

NEW QUESTION 23
A company has Aruba gateways that are Implementing gateway IDS/IPS in IDS mode. The customer complains that admins are receiving too frequent of repeat email notifications for the same threat. The threat itself might be one that the admins should investigate, but the customer does not want the email notification to repeat as often.
Which setting should you adjust in Aruba Central?

 
 
 
 

NEW QUESTION 24
Refer to the scenario.
A customer has an Aruba ClearPass cluster. The customer has AOS-CX switches that implement 802.1X authentication to ClearPass Policy Manager (CPPM).
Switches are using local port-access policies.
The customer wants to start tunneling wired clients that pass user authentication only to an Aruba gateway cluster. The gateway cluster should assign these clients to the “eth-internet” role. The gateway should also handle assigning clients to their VLAN, which is VLAN 20.
The plan for the enforcement policy and profiles is shown below:

The gateway cluster has two gateways with these IP addresses:
* Gateway 1
o VLAN 4085 (system IP) = 10.20.4.21
o VLAN 20 (users) = 10.20.20.1
o VLAN 4094 (WAN) = 198.51.100.14
* Gateway 2
o VLAN 4085 (system IP) = 10.20.4.22
o VLAN 20 (users) = 10.20.20.2
o VLAN 4094 (WAN) = 198.51.100.12
* VRRP on VLAN 20 = 10.20.20.254
The customer requires high availability for the tunnels between the switches and the gateway cluster. If one gateway falls, the other gateway should take over its tunnels. Also, the switch should be able to discover the gateway cluster regardless of whether one of the gateways is in the cluster.
Assume that you have configured the correct UBT zone and port-access role settings. However, the solution is not working.
What else should you make sure to do?

 
 
 
 

NEW QUESTION 25
Refer to the scenario.
A customer has an AOS10 architecture that is managed by Aruba Central. Aruba infrastructure devices authenticate clients to an Aruba ClearPass cluster.
In Aruba Central, you are examining network traffic flows on a wireless IoT device that is categorized as
“Raspberry Pi” clients. You see SSH traffic. You then check several more wireless IoT clients and see that they are sending SSH also.
You want a fast way to find a list of all the IoT clients that have used SSH.
What step can you take?

 
 
 
 

NEW QUESTION 26
You are working with a developer to design a custom NAE script for a customer. You are helping the developer find the correct REST API resource to monitor.
Refer to the exhibit below.

What should you do before proceeding?

 
 
 
 

NEW QUESTION 27
Which element helps to lay the foundation for solid network security forensics?

 
 
 
 

NEW QUESTION 28
Refer to the scenario.
A customer requires these rights for clients in the “medical-mobile” AOS firewall role on Aruba Mobility Controllers (MCs):
Permitted to receive IP addresses with DHCP
* Permitted access to DNS services from 10.8.9.7 and no other server
* Permitted access to all subnets in the 10.1.0.0/16 range except denied access to 10.1.12.0/22
* Denied access to other 10.0.0.0/8 subnets
* Permitted access to the Internet
* Denied access to the WLAN for a period of time if they send any SSH traffic
* Denied access to the WLAN for a period of time if they send any Telnet traffic
* Denied access to all high-risk websites
External devices should not be permitted to initiate sessions with “medical-mobile” clients, only send return traffic.
The exhibits below show the configuration for the role.

There are multiple issues with the configuration.
What is one of the changes that you must make to the policies to meet the scenario requirements? (In the options, rules in a policy are referenced from top to bottom. For example, “medical-mobile” rule 1 is “ipv4 any any svc-dhcp permit,” and rule 8 is “ipv4 any any any permit’.)

 
 
 
 

NEW QUESTION 29
Refer to the scenario.
A customer has an Aruba ClearPass cluster. The customer has AOS-CX switches that implement 802.1X authentication to ClearPass Policy Manager (CPPM).
Switches are using local port-access policies.
The customer wants to start tunneling wired clients that pass user authentication only to an Aruba gateway cluster. The gateway cluster should assign these clients to the “eth-internet” role. The gateway should also handle assigning clients to their VLAN, which is VLAN 20.
The plan for the enforcement policy and profiles is shown below:

The gateway cluster has two gateways with these IP addresses:
* Gateway 1
o VLAN 4085 (system IP) = 10.20.4.21
o VLAN 20 (users) = 10.20.20.1
o VLAN 4094 (WAN) = 198.51.100.14
* Gateway 2
o VLAN 4085 (system IP) = 10.20.4.22
o VLAN 20 (users) = 10.20.20.2
o VLAN 4094 (WAN) = 198.51.100.12
* VRRP on VLAN 20 = 10.20.20.254
The customer requires high availability for the tunnels between the switches and the gateway cluster. If one gateway falls, the other gateway should take over its tunnels. Also, the switch should be able to discover the gateway cluster regardless of whether one of the gateways is in the cluster.
Assume that you are using the “myzone” name for the UBT zone.
Which is a valid minimal configuration for the AOS-CX port-access roles?

 
 
 
 

NEW QUESTION 30
Refer to the scenario.
A hospital has an AOS10 architecture that is managed by Aruba Central. The customer has deployed a pair of Aruba 9000 Series gateways with Security licenses at each clinic. The gateways implement IDS/IPS in IDS mode.
The Security Dashboard shows these several recent events with the same signature, as shown below:

Which step could give you valuable context about the incident?

 
 
 
 

NEW QUESTION 31
Refer to the scenario.
A customer requires these rights for clients in the “medical-mobile” AOS firewall role on Aruba Mobility Controllers (MCs):
Permitted to receive IP addresses with DHCP
Permitted access to DNS services from 10.8.9.7 and no other server
Permitted access to all subnets in the 10.1.0.0/16 range except denied access to 10.1.12.0/22 Denied access to other 10.0.0.0/8 subnets Permitted access to the Internet Denied access to the WLAN for a period of time if they send any SSH traffic Denied access to the WLAN for a period of time if they send any Telnet traffic Denied access to all high-risk websites External devices should not be permitted to initiate sessions with “medical-mobile” clients, only send return traffic.
The exhibits below show the configuration for the role.

There are multiple issues with the configuration.
What is one of the changes that you must make to the policies to meet the scenario requirements? (In the options, rules in a policy are referenced from top to bottom. For example, “medical-mobile” rule 1 is “ipv4 any any svc-dhcp permit,” and rule 8 is “ipv4 any any any permit’.)

 
 
 
 

NEW QUESTION 32
You want to use Device Insight tags as conditions within CPPM role mapping or enforcement policy rules.
What guidelines should you follow?

 
 
 
 

NEW QUESTION 33
A company has Aruba gateways and wants to start implementing gateway IDS/IPS. The customer has selected Block for the Fail Strategy.
What might you recommend to help minimize unexpected outages caused by using this particular fall strategy?

 
 
 
 

NEW QUESTION 34
You are designing an Aruba ClearPass Policy Manager (CPPM) solution for a customer. You learn that the customer has a Palo Alto firewall that filters traffic between clients in the campus and the data center.
Which integration can you suggest?

 
 
 
 

To become an Aruba Certified Network Security Expert, candidates must pass the HPE6-A84 exam. HPE6-A84 exam is designed to test the candidate’s ability to analyze network security threats and vulnerabilities, and recommend effective solutions. Aruba Certified Network Security Expert Written Exam certification is ideal for IT professionals who work in network security roles, such as security analysts, network administrators, and IT managers. Aruba certifications are highly valued in the industry, and the HPE6-A84 certification is no exception.

 

Latest HP HPE6-A84 Dumps with Test Engine and PDF (New Questions): https://www.trainingquiz.com/HPE6-A84-practice-quiz.html

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt

Leave a Reply

Please sing in to post your comment or singup if you don't have account.
Enter the text from the image below