Quiz Training Materials

Best professional training materials

4.7/5 - (4 votes)

2022 Realistic HPE6-A45 Dumps are Available for Instant Access

Download Exam HPE6-A45 Practice Test Questions with 100% Verified Answers

HPE6-A45 Implementing Aruba Campus Switching solutions Exam Topics

Candidates must know the exam topics before they start preparation. Because it will help them in hitting the core. Our HPE6-A45 exam dumps will include the following topics:

1. Identify, describe, and apply foundational networking architectures and technologies

  • Describe the basics of Layer 2 Ethernet to include broadcast domains and ARP messages.
  • Identify, describe, and explain VLANs.
  • Interpret an IP routing table and explain default routes, static routing, and dynamic routing such as OSPF.
  • Identify the roles of TFTP, SFTP, FTP, Telnet, SNMPv2, and SNMPv3 in the management of Aruba network devices, and apply the appropriate security for these features.
  • Describe and apply link aggregation.
  • Describe Layer 2 redundancy technologies such as STP, RSTP, MSTP, and VSF, and recognize the benefits of each.

2. Identify, describe, and differentiate the functions and features of Aruba products and solutions

  • Compare and contrast Aruba Networking solutions and features and identify the appropriate product for an environment.
  • Identify and explain how Aruba, a Hewlett Packard Enterprise company, delivers solutions that enable the digital workplace.
  • Identify basic features and management options for Aruba wired and wireless products.

3. Install, configure, set up, and validate Aruba networking solutions

  • Validate the installed solution with the use of debugging technology, logging, and show and display commands.
  • Configure ArubaOS switches with Layer 2 technologies such as RSTP and MSPT, link aggregation, VLANs, LLDP, and device profiles.
  • Configure basic IP routing with static routes or OSPF on ArubaOS switches.
  • Manage the software and configuration files on ArubaOS switches and manage ArubaOS switches and APs with Aruba AirWave.
  • Configure basic features on ArubaOS switches to include initial settings and management access.

4. Tune, optimize, and upgrade Aruba networking solutions

  • Optimize Layer 2 and Layer 3 infrastructures through broadcast domain reduction, VLANs, and VSF.

5. Manage, monitor, administer, and operate Aruba networking solutions

  • Perform network management following best practices.
  • Perform administrative tasks such as moves, adds, changes, deletions, and password resets for managed devices.

HPE6-A45 Implementing Aruba Campus Switching solutions Exam

HPE6-A45 exam test validates you have got the elementary networking knowledge and skills required to style, founded, and configure a basic Aruba Wireless Local Area Network (WLAN) utilizing the V8 software system architecture and features to SMB Solutions for Engineers and credits towards Cisco Proctored exam for validating knowledge Certification. This exam validates the Candidate’s ability to sell strategically across all technologies in this exam Candidate will be tested for borderless Networks Collaboration and Data Center topics. It also deals with the ability to plan a business and demand generational sales tools including collateral and web content. It also deals with the ability to develop sales opportunities for the IPS Security portfolio including appliance and Cloud-Based offerings Candidate Combines pre-sales and pastels functions responsible for designing and implementing a simple customer business portfolio. Account Managers, System Engineers, and Cisco Channel Partners usually hold or pursue this certification and you can expect the same job role after completion of this certification.

This certification validates you have got the elementary networking knowledge and skills required to style, founded, and configure a basic Aruba Wireless Local Area Network (WLAN) utilizing the V8 software system architecture and features. In this guide, we will cover all the aspects of HPE6-A45 exam dumps and HPE6-A45 practice exams.

 

QUESTION 63
Refer to the exhibit.

A network administrator needs to alter myACL so that it permits all traffic that arrives in VLAN 2 and is destined to 10.1.10.0/24. Besides this change, the ACL must continue to act as it does now. The administrator plans this new rule:
permit ip any 10.1.10.0/24
How should the administrator apply this rule to meet all requirements?

 
 
 
 

QUESTION 64
Refer to the exhibits.
Exhibit 1.

Exhibit 2.

The company wants to minimize congestion on Link 1.
Which spanning tree implementation meets this goal?

 
 
 
 

QUESTION 65
Refer to the exhibits.
Exhibit 1.

Exhibit 2.

The company wants to minimize congestion on Link 1.
Which spanning tree implementation meets this goal?

 
 
 
 

QUESTION 66
Refer to the exhibit.

An AOS-Switch has the ACL shown in the exhibit. A network administrator then enters these commands:
Switch(config)# mac-access-list standard myACL
Switch(config-std-macl)# 25 deny 007d.45cc.0000 0000.0000.ffff
How does this ACL treat these frames:
1 = 007d.45cc.ffff 2 = 007d.45cc.0000

 
 
 
 

QUESTION 67
A customer wants to authenticate AOS-Switch managers to a RADIUS server. The CIO wants to assign different rights to different management users for granular control over their rights and privileges. What must the network administrator enable on the AOS-Switches to ensure they comply with this plan?

 
 
 
 

QUESTION 68
Refer to the exhibit.

AOS-Switches will enforce 802.1X authentication on edge ports. The company has two RADIUS servers, which are meant to provide redundancy and load sharing of requests. The exhibit shows the planned RADIUS settings to deploy to the switches.
What should customers understand about this plan?

 
 
 
 

QUESTION 69
Refer to the exhibits.
Exhibit 1

Exhibit 2

Exhibit 1 shows the topology for the network. The network administrator sees the log entries shown in Exhibit 2. Which type of failure is indicated?

 
 
 
 

QUESTION 70
Refer to the exhibit.

An AOS-Switch connects to an unmanaged switch in a meeting room. The exhibit shows security settings for this port. Users report that they sometimes lose connectivity and then get it back.
Which best practice should network administrators follow to avoid issue?

 
 
 
 

QUESTION 71
Refer to the exhibits.

The network administrator enters the commands shown in Exhibit 2, and Switch-1 and Switch-2 exchange keepalive messages. What is the expected behavior if Switch-1 later fails to receive keepalive messages from Switch-2?

 
 
 
 

QUESTION 72
Exhibit

Switch-2, Switch-5 and Switch-6 currently have many OSPF routes to Area 1 networks.
The network administrator wants to replace these routes with a single aggregated route to
10.10.1.0.0/16 on each switch. Where should the administrator specify the 10.1.0.0/61 range?

 
 
 
 

QUESTION 73
Refer to the exhibits.
Exhibit 1

Exhibit 2

Traffic between servers in Area 1 takes a sub-optimal path rather than the link dedicated to VLAN 1000, subnet 10.0.0.0/30. Based on the exhibits, what can administrators do to create a better path for this traffic?

 
 
 
 

QUESTION 74
Refer to the exhibits.
Exhibit 1

Exhibit 2

The exhibits show the current operational state for routes on Switch-3. The company wants Switch-3 to send all traffic to 172.16.0.0/16 through Switch-2.
Which single configuration change creates the desired behavior?

 
 
 
 

QUESTION 75
Refer to the exhibits.


The network administrator enters the commands shown in Exhibit 2, and Switch-1 and Switch-2 exchange keepalive messages. What is the expected behavior if Switch-1 later fails to receive keepalive messages from Switch-2?

 
 
 
 

QUESTION 76
Refer to the exhibit.

Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue. The network administrator sees that both switches show this interface as up. The administrator sees the output shows in the exhibit on Switch-1.
What is a typical issue that could cause this output?

 
 
 
 

QUESTION 77
Refer to the exhibits.


The network administrator enters the commands shown in Exhibit 2, and Switch-1 and Switch-2 exchange keepalive messages. What is the expected behavior if Switch-1 later fails to receive keepalive messages from Switch-2?

 
 
 
 

QUESTION 78
What is a primary use case for RPVST+ on AOS-Switches?

 
 
 
 

Positive Aspects of Valid Dumps HPE6-A45 Exam Dumps! : https://www.trainingquiz.com/HPE6-A45-practice-quiz.html

Related Links: myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt

You May Also Like...

Leave a Reply

Please sing in to post your comment or singup if you don't have account.

Enter the text from the image below