Get Prepared for Your HPE2-T37 Exam With Actual 81 Questions [Q41-Q61]

4/5 - (1 vote)

Get Prepared for Your HPE2-T37 Exam With Actual 81 Questions

Valid HPE2-T37 Test Answers Full-length Practice Certification Exams

Q41. As a part of troubleshooting, you have to reinstall the same version of the firmware on an HPE Synergy Compute Module. Click the area within the Firmware section of the server profile that will allow you to install the same firmware version.

Q42. You have created volumes using array management tools and imported the volumes to HPE OneView.
Which statement about these volumes is true?

Imported volumes are treated as private volumes and can be only used boot volumes

Volumes imported to HPE OneView is managed just like a volume created using HPE OneView

Volumes imported to HPE OneView cannot be removed using the HPE OneView interface

A snapshot for imported volumes can be ceated only by using array management tools

Q43. Click the option that will allow you to update the firmware of master and satellite modules.

Q44. Click the option that will prevent the appliance from sending any email notifications or forwarding any SNMP traps that are related to the server hardware.

Q45. A customer wants to estimate the cost of the licenses required to manage HPE Synergy and some external components When component includes an HPE OneView license for management?

Compute Module

Storage Array

Master Module

Logical Enclosure

Q46. You try to add an HPE Primera array to HPE OneView, but you get a connectivity error. However, you can connect to the array using SSMC. What should you verify before adding HPE Primera to HPE OneView?

whether WSAPI service is enabled on HPE Primera array.

whether the appropriate license for HPE Primera Is available in HPE OneView.

whether array management using HPE OneView is enabled in SSMC.

whether there are at least two Fibre Channel networks defined in HPE OneView.

Q47. Refer to the exhibit.

Which statement about the logical interconnect shown is true?

For FC uplink sets, an additional uplink from second module should be added for redundancy.

The maximum supported number of the internal networks for logical interconnect is configured.

Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.

FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.

Q48. Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.

Q49. How will setting the Purpose field within the network definition of a server profile impact the network traffic?

network purpose can give higher priority for a specific type of traffic

network purpose will impact the traffic only if Virtual Connect modules are used

network purpose will define QoS within Logical Interconnect

network purpose does not affect the behavior of the network

Q50. You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?

to provide static IP addresses to IL0 and interconnect modules if applicable

to provide static IP addresses for an operating system running on a Compute Module

to provide static IP addresses for Logical Interconnects and Logical Enclosures

to provide static IP addresses for storage systems managed in HPE OneView

Q51. Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.

Q52. Which HPE components can be managed using HPE Composer? (select two.)

HPE Superdome Flex 280

HPE Synergy Virtual Connect SE 32Gb FC Module

HPE Synergy 480 Compute Modules

HPE B-series SN6600B Fibre Channel Switch

HPE MSA 2062 Storage Array

Q53. You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?

A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.

A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.

An external repository must be created, because standalone components are supported only In an external repository.

ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.

Q54. Refer to the exhibit.

You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?

The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.

HPE OneView was restored from a backup that created ^consistency with the server profile template.

Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.

Changes to the server profile were implemented directly on the server profile.

Q55. Click the option that will allow you to update the firmware of master and satellite modules.

Q56. You want to put two FlexNlCs into a single Link Aggregation Group within a server profile. What Is a prerequisite for this setup?

The sFlow option must be enabled and configured.

Both FlexNlCs must be connected to the same network.

The Compute Module profile must have exactly two connections defined.

An upgrade license must be purchased and deployed.

Q57. Refer to the exhibit.

After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?

Snapshot functionality will be limited only to the volumes not using these SANs.

Volume presentation through server profile will work with the discovered state.

Auto-zoning functionality will not work until SANs are associated with networks.

Volume provisioning will only work for arrays that ate accessible through these SANs.

Q58. You configured downlink aggregation for one of the HPE Synergy Compute Modules in an environment by placing two connections in the same Link Aggregation Group. After you made the changes to the server profile, its status changed to critical.
What can be done to fix this issue?

The teaming or bonding driver in the server OS must be configured to enable the LACP and to form the LAG correctly.

The server profile for a given HPE Synergy compute module should be reapplied, then the Compute Module should be rebooted.

Link Aggregation Group functionality should be enabled in advanced properties of the Logical Interconnect.

Ensure that the Link Aggregation Group time-out value matches the server set values.

Q59. You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?

Logical Enclosure

Logical Interconnect Group

Logical Interconnect

Server Profile

Q60. Refer to the exhibit.

Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?

The other networks are not configured with the required Smart Link parameter.

The other networks are not added to the Logical Interconnect Group configuration.

The other networks have Private Network’ selected, which hides them from Compute Modules.

The other networks are configured with a purpose other than General or Management.

Q61. Refer to the exhibit.

A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?