350-801 PDF Dumps May 09, 2023 Recently Updated Questions [Q15-Q38]

5/5 - (1 vote)

350-801 PDF Dumps | May 09, 2023 Recently Updated Questions

350-801 Exam Questions – Valid 350-801 Dumps Pdf

NEW QUESTION 15
A collaboration engineer configures Global Dial Plan Replication for multiple Cisco UCM clusters. The local cluster acts as the hub cluster and the remaining clusters act as spoke clusters. Which service must the engineer configure on the local cluster?

Location Conveyance on intercluster SIP trunks

intra-Cluster Communication Signaling

Mobility Cross Cluster

Intercluster Lookup Service

NEW QUESTION 16
During the Cisco IP Phone registration process, the TFTP download (ails. What are two reasons (or this issue? (Choose two.)

The DNS server was not specified, which is needed to resolve the DHCP server IP address.

Option 100 string was not specified, or an incorrect Option 100 string was specified.

The Cisco IP Phone does not know the IP address of the TFTP server.

The Cisco IP Phone does not know the IP address of any of the Cisco UCM Subscriber nodes.

Option 150 string was not specified, or an incorrect Option 150 string was specified.

NEW QUESTION 17
As a voice engineer, which two recommendations do you make to your company to optimize Cisco Unified Communications Manager configuration to reduce the number of toll fraud incidents? (Choose two.)

Inbounds CSS on any gateway typically should have access to internal destinations only and not PSTN destinations.

Classify all route patterns as on-net and prohibit on-net to on-net call transfers in Cisco Unified CM service parameters.

Classify all route patterns as on-net or off-net and prohibit off-net call transfers in Cisco Unified CM Service parameters.

Inbound CSS on any gateway typically should have access to internal destinations and PSTN destinations.

Classify all route pattern as off-net and prohibit off-net to off-net call transfers in Cisco Unified CM service parameters.

NEW QUESTION 18
A company deploys centralized cisco ucm architecture for a hub location and two remote sites.
The company has only one ITSP connection at the hub connection, and ITSP supports only G.711 calls Remote site A has a 1-Gbps fiber connection to the hub connection and calls to and from remote side A use G.711 codec Remote site B has a 1 T1 connection to the hub location and calls to and from remote site B use G.729 codec Based on the provided guidance, a Cisco voice engineer must design media resource management for the customer. What is the method that needs to be followed?

configure the hardware transcoder on the site B router.

configure the hardware transcoder on the site A router.

configure the hardware transcoder on the hub location router.

configure the software transcoder on Cisco UCM to support voice calls to and from both remote sites.

NEW QUESTION 19
An engineer is configuring a Cisco Unified Border Element to allow the video endpoints to negotiate without the Cisco Unified Border Element interfering in the process. What should the engineer configure on the Cisco Unified Border Element to support this process?

Configure codec transparent on the dial peers.

Configure a transcoder for video protocols.

Configure a hardcoded codec on the dial peers.

Configure pass-thru content sdp on the voice service.

Section: Protocols, Codecs, and Endpoints
Explanation/Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/cube/configuration/cube-book/cube-codec-basic.html

NEW QUESTION 20
An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls.
Which configuration is needed to accomplish this task?

NEW QUESTION 21
Refer to the exhibit.

When making a call to a MRA client, what are the combinations of protocol on each of the different sections A-B-C?

IP TCP/TLS(A) +SIP TCP/TLS (B) +TLS (C)

SIP TLS (A) +SIP TLS (B) +SIP TLS (C)

SIP TCP/TLS (A) + SIP TLS (B) + SIP TLS (C)

SIP TCP/TLS +SIP TCP/TLS (B) + SIP TCP/TLS (C)

NEW QUESTION 22
Which field is configured to change the caller ID information on a SIP route pattern?

Calling party Transformation Mask

Route partition

Called party Transformation Mask

Connected Line ID Presentation

Cisco Unified Communications Manager uses connected line ID presentation (COLP/COLR) as a supplementary service to allow or restrict the called party phone number on a call-by-call basis.
Calling Party Transform Mask, Enter a transformation mask value. Valid entries include the digits
0 through 9; the wildcard characters X, asterisk (*), and octothorpe (#); and the international escape character +.

NEW QUESTION 23
What is required for Cisco UCM to accept SIP calls with a URI in the format of “sip
[email protected]”?

Define Cluster Fully Qualified Domain Name under Servers in Cisco UCM.

Change the Destination Address to a Fully Qualified Domain Name on the SIP trunk.

Set the SIPS URI Handling to True in CallManager Service Parameters.

Define Cluster Fully Qualified Domain Name in Enterprise Parameters.

NEW QUESTION 24
How does an administrator make a Cisco IP phone display the last 10 digits of the calling number when the call is in the connected state, and also display the calling number in the E.164 format within call history on the phone?

Change the service parameter Apply Transformations On Remote Number to True.

Configure a translation pattern that has a Calling Party Transform Mask of XXXXXXXXXX.

On the inbound SIP trunk, change Significant Digits to 10.

Configure a calling party transformation pattern that keeps only the last 10 digits.

NEW QUESTION 25
Refer to the exhibit.

A Cisco UCM user with directory number 4401 dials 5507. and the call is routed to a Cisco Unified Border Element. Which IP address will the call be sent to?

10.0.0.3

10.0.0.1

10.0.0.2

10.0.0.4

NEW QUESTION 26
Refer to the exhibit. You deploy Mobile and Remote Access for Jabber and discover that Jabber for Windows does not register to cisco Unified Communications Manager while outside of the office. What is a cause of this issue?

The DNS record should be created for _ cisco-uds _tcp example.com.

The DNS record should be changed from _collab-edge._tcp.example.com to __collab-edge
_tls.example.com.

The DNS record type should be changed from SRV to A.

Server 4.2.2.2 is not a valid DNS server.

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A
9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns- configuration-guide_chapter_010.html

NEW QUESTION 27
Which two access layer switches provide support to provide high-quality voice and take advantage of the full voice feature set. To provide high-quality voice and take advantage of the full voice feature set, which two access layer switches provide support? Choose two

Use multiple egress queues to provide priority queuing of RTP voice packet streams and the ability to classify or reclassify traffic and establish a network trust boundary.

Use 808.IQ trunking and 802.lp for proper treatment of Layer 2 CoS packet marking on ports with phones connected.

Implement IP RTP header compression on the serial interface to reduce the bandwidth requlreq per voice call on point-to-point links.

Deploy RSVP to improve VoIP QoS only where it can have a positive Impact on quality and functionality where there Is limited bandwidth and frequent network congestion.

Map audio and video streams of video calls (AF41 and AF42) to a class-based queue with weighted random early detection.

NEW QUESTION 28
A collaboration engineer must configure Cisco Unified Border Element to support up to five concurrent outbound calls across an Ethernet Link with a bandwidth of 160 kb to the Internet Telephony service provider.
Which set of commands allows the engineer to complete the task without compromising voice quality?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 29
Refer to the exhibit.

What is a possible cause of the PRI issue?

The cable is unplugged.

The controller shut down.

The clock source is incorrect.

The framing is configured incorrectly.

NEW QUESTION 30
The IP phones al a customer site do not pick an IP address from the DHCP An engineer must temporarily disable LLDP on all ports of the switch to leave only CDP. Which two commands accomplish this task? (Choose two.)

Switch# copy running-config startup-config

Switch(config)# no lldp run

Switch# configure terminal

Switch(conlicj)# interface GigabitEthernet1/0/1

Switch(config># no lldp transmit

NEW QUESTION 31
An engineer is configuring a BOT device for a Jabber user is Cisco Unified Communication Manager. Which phone type must be selected?

Cisco Dual mode for Android

Cisco Unified Client services Framework

third-party SIP device

Cisco Dual Mode for iPhone

NEW QUESTION 32
According to the QoS Baseline Model, drag and drop the applications from the left onto the Per-Hop Behavior values on the right.

NEW QUESTION 33
Which two DNS records must be created to configure Service Discovery for on-premises Jabber? (Choose two.)

_cisco-uds._tls.cisco.com pointing to the IP address of Cisco UCM

_cuplogin_tcp.cisco.com pointing to a record of IM and Presence

_cuplogin._tls.cisco.com pointing to the IP address of IM and Presence

_cisco-uds.tcp.cisco.com pointing to a record of Cisco UCM

_xmpp.tls.cisco.com pointing to a record of IM and Presence

NEW QUESTION 34
A collaboration engineer troubleshoots issues with a Cisco IP Phone 7800 Series The IPv4 address of the phone is reachable via ICMP and HTTP and the phone is registered to Cisco UCM However, the engineer cannot reach the CLI of the phone Which two actions in Cisco UCM resolve the issue? (Choose two)

Enable FIPS Mode under Product Specific Configuration Layout in Cisco UCM

Enable Settings Access under Product Specific Configuration Layout in Cisco UCM.

Enable SSH Access under Product Specific Configuration Layout in Cisco UCM

Disable Web Access under Product Specific Configuration Layout in Cisco UCM

Set a username and password under Secure Shell Information in Cisco UCM

NEW QUESTION 35
Given the H.323 gateway configuration and using Cisco best practices, how must the called party transformation pattern be configured to ensure that a proper ISDN type of number is set?

NEW QUESTION 36
Which Cisco Unified Communications Manager service parameter should be enabled disconnect a multiparty call when the call initiator hangs up?

Drop Ad Hoc Conference

H.225 Block Setup Destination

Block OffNet To OffNet Transfer

Enterprise Feature Access Code for Conference

Section: Infrastructure and Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/ CUCM_BK_SE5FCFB6_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-system-guide-
100_chapter_011000.html#CUCM_TK_DFC66444_00

NEW QUESTION 37
Which packet delay is the maximum supported between Cisco Unified Communications Manager nodes for clustering over WAN deployments?

80 ms round trip

40 ms round trip

510 ms round trip

150 ms round trip

NEW QUESTION 38
An engineer configures a SIP trunk for MWI between a Cisco UCM cluster and Cisco Unity Connection. The Cisco UCM cluster fails to receive the SIP notify messages. Which two SIP trunk settings resolve this issue? (Choose two.)

transmit security status

accept unsolicited notification

allow charging header

accept out-of-band notification

accept out-of-dialog refer

Loading …