2023 Valid N10-008 Exam Updates – 2023 Study Guide [Q95-Q118]

Q95. Users within a corporate network need to connect to the Internet, but corporate network policy does not allow direct connections. Which of the following is MOST likely to be used?

Q96. A technician is searching for a device that is connected to the network and has the device’s physical network address. Which of the following should the technician review on the switch to locate the device’s network port?

Q97. Which of the following needs to be tested to achieve a Cat 6a certification for a company’s data cawing?

Q98. A network engineer is investigating reports of poor network performance. Upon reviewing a report, the engineer finds that jitter at the office is greater than 10ms on the only WAN connection available. Which of the following would be MOST affected by this statistic?

Q99. A company is reviewing ways to cut the overall cost of Its IT budget. A network technician suggests removing various computer programs from the IT budget and only providing these programs on an as-needed basis. Which of the following models would meet this requirement?

Q100. An ISP is unable to provide services to a user in a remote area through cable and DSL. Which of the following is the NEXT best solution to provide services without adding external infrastructure?

Q101. A network technician is selecting a replacement for a damaged fiber cable that goes directly to an SFP transceiver on a network switch. Which of the following cable connectors should be used?

Q102. Switch 3 was recently added lo an existing stack to extend connectivity to various parts of the network. After the update, new employees were not able to print to the main networked copiers from then workstations. Following are the port configurations for the switch stack in question:

Which of the following should be configured to resolve the issue? (Select TWO).

Q103. Which of me following security controls indicates unauthorized hardware modifications?

Q104. A network technician is investigating an issue with a desktop that is not connecting to the network. The desktop was connecting successfully the previous day, and no changes were made to the environment. The technician locates the switchport where the device is connected and observes the LED status light on the switchport is not lit even though the desktop is turned on Other devices that arc plugged into the switch are connecting to the network successfully Which of the following is MOST likely the cause of the desktop not connecting?

Q105. The following instructions were published about the proper network configuration for a videoconferencing device:
“Configure a valid static RFC1918 address for your network. Check the option to use a connection over NAT.”
Which of the following is a valid IP address configuration for the device?

Q106. While waking from the parking lot lo an access-controlled door an employee sees an authorized user open the door. Then the employee notices that another person catches the door before It closes and goes inside Which of the following attacks Is taking place?

Q107. Which of the following is the physical topology for an Ethernet LAN?

Q108. A network engineer is monitoring a fiber uplink to a remote office and notes the uplink has been operating at 100% capacity for a long duration. Which of the following performance metrics is MOST likely to be impacted with sustained link saturation?

Q109. After HVAC failures caused network outages, the support team decides to monitor the temperatures of all the devices. The network administrator cannot find a command that will display this information. Which of the following will retrieve the necessary information?

Q110. Which of the following can have multiple VLAN interfaces?

Q111. An attacker targeting a large company was able to inject malicious A records into internal name resolution servers. Which of the following attack types was MOST likely used?

Q112. A WAN technician reviews activity and identifies newly installed hardware that is causing outages over an eight-hour period. Which of the following should be considered FIRST?

Q113. An IDS was installed behind the edge firewall after a network was breached. The network was then breached again even though the IDS logged the attack. Which of the following should be used in place of these devices to prevent future attacks?

Q114. When a fiber uplink is operating at 100% capacity for an extended period of time, it can cause sustained link saturation. This can impact the network’s performance by increasing latency. Latency is the time it takes for a packet to travel from the source to its destination. When there is link saturation, packets may have to wait in a queue before being transmitted, which increases the time it takes for them to reach their destination. As a result, users may experience delays or timeouts when accessing network resources.
Other metrics such as jitter, speed, and bandwidth are also important, but they are not as directly impacted by sustained link saturation as latency.
A company is moving to a new building designed with a guest waiting area that has existing network ports. Which of the following practices would BEST secure the network?

Q115. A Wi-Fi network was originally configured to be able to handle interference from a microwave oven. The microwave oven was recently removed from the office. Now the network administrator wants to optimize the system to maximize the range of the signal. The main sources of signal degradation are the numerous cubicles and wooden walls between the WAP and the intended destination. Which of the following actions should the administrator take?

Q116. Which of the following devices have the capability to allow communication between two different subnetworks? (Select TWO).

Q117. A website administrator is concerned the company’s static website could be defaced by hacktivists or used as a pivot point to attack internal systems. Which of the following should a network security administrator
recommend to assist with detecting these activities?

Q118. During an annual review of policy documents, a company decided to adjust its recovery time frames. The company agreed that critical applications can be down for no more than six hours, and the acceptable amount of data loss is no more than two hours. Which of the following should be documented as the RPO?