Pass Authentic The Open Group OGEA-103 with Free Practice Tests and Exam Dumps [Q92-Q112]

QUESTION 92
What is presented as “striking a balance between positive and negative outcomes resulting from the realization of either opportunities or threats?

Agile development

Architecture Security

Transition Management

Risk Management

QUESTION 93
What is present in all phases within the ADM and should be identified, classified and mitigated before starting a transformation effort?

Budgetary constraints

Risk

Schedule constraints

Information gaps

According to the TOGAF Standard, 10th Edition, risk is present in all phases within the Architecture Development Method (ADM), and it should be identified, classified, and mitigated before starting a transformation effort 1. Risk is defined as “the effect of uncertainty on objectives” 2, and it can have positive or negative impacts on the architecture project. Risk management is a technique that helps to assess and address the potential risks that may affect the achievement of the architecture objectives, and to balance the trade-offs between opportunities and threats. Risk management is applied throughout the ADM cycle, from the Preliminary Phase to the Requirements Management Phase, and it is integrated with other techniques, such as stakeholder management, business transformation readiness assessment, gap analysis, and migration planning 1. The other options are not correct, as they are not present in all phases within the ADM, and they are not necessarily identified, classified, and mitigated before starting a transformation effort. Budgetary constraints are the limitations on the financial resources available for the architecture project, and they are usually considered in Phase E: Opportunities and Solutions, and Phase F: Migration Planning 3. Schedule constraints are the limitations on the time available for the architecture project, and they are also usually considered in Phase E and F 3. Information gaps are the missing or incomplete data or knowledge that may affect the architecture project, and they are usually identified in Phase B: Business Architecture, Phase C:
Information Systems Architecture, and Phase D: Technology Architecture . References: 1: TOGAF Standard,
10th Edition, Part III: ADM Guidelines and Techniques, Chapter 32: Risk Management. 2: TOGAF Standard,
10th Edition, Part I: Introduction, Chapter 3: Definitions. 3: TOGAF Standard, 10th Edition, Part II:
Architecture Development Method, Chapter 16: Phase E: Opportunities and Solutions, and Chapter 17: Phase F: Migration Planning. : TOGAF Standard, 10th Edition, Part II: Architecture Development Method, Chapter
13: Phase B: Business Architecture, Chapter 14: Phase C: Information Systems Architecture, and Chapter 15:
Phase D: Technology Architecture.

QUESTION 94
What is an objective of the ADM Preliminary Phase?

To develop a vision of the business value to be delivered by the proposed enterprise architecture

To select and implement tools to support the Architecture Capability

To obtain approval for the Statement of Architecture Work

To create the initial version of the Architecture Roadmap

QUESTION 95
Consider the following descriptions of deliverables consumed and produced across the TOGAF ADM cycle.

Which deliverables match these descriptions?

1 Architecture Requirements Specification – 2 Request for Architecture Work – 3 Statement of Architecture Work – 4 Architecture Principles

1 Statement of Architecture Work – 2 Architecture Principles – 3 Architecture Requirements Specification – 4 Request for Architecture Work

1 Architecture Principles – 2 Architecture Requirements Specification – 3 Request for Architecture Work – 4 Statement of Architecture Work

1 Request for Architecture Work – 2 Statement of Architecture Work – 3 Architecture Principles – 4 Architecture Requirements Specification

QUESTION 96
Which statement about Requirements Management is most correct?

The purpose of Requirements Management is to process change requests

Stakeholder requirements are captured once in Phase A and managed throughout the ADM cycle

Requirements Management is a step of all ADM Phases

Requirements Management and stakeholder engagement are placed at the center of architecture development

QUESTION 97
Refer to the table below:

Which ADM Phase does this describe?

Phase E

Phase A

Phase G

Phase F

QUESTION 98
What is present in all phases within the ADM and should be identified, classified and mitigated before starting a transformation effort?

Budgetary constraints

Risk

Schedule constraints

Information gaps

According to the TOGAF Standard, 10th Edition, risk is present in all phases within the Architecture Development Method (ADM), and it should be identified, classified, and mitigated before starting a transformation effort 1. Risk is defined as “the effect of uncertainty on objectives” 2, and it can have positive or negative impacts on the architecture project. Risk management is a technique that helps to assess and address the potential risks that may affect the achievement of the architecture objectives, and to balance the trade-offs between opportunities and threats. Risk management is applied throughout the ADM cycle, from the Preliminary Phase to the Requirements Management Phase, and it is integrated with other techniques, such as stakeholder management, business transformation readiness assessment, gap analysis, and migration planning
1. The other options are not correct, as they are not present in all phases within the ADM, and they are not necessarily identified, classified, and mitigated before starting a transformation effort. Budgetary constraints are the limitations on the financial resources available for the architecture project, and they are usually considered in Phase E: Opportunities and Solutions, and Phase F: Migration Planning 3. Schedule constraints are the limitations on the time available for the architecture project, and they are also usually considered in Phase E and F 3. Information gaps are the missing or incomplete data or knowledge that may affect the architecture project, and they are usually identified in Phase B: Business Architecture, Phase C: Information Systems Architecture, and Phase D: Technology Architecture . References: 1: TOGAF Standard, 10th Edition, Part III: ADM Guidelines and Techniques, Chapter 32: Risk Management. 2: TOGAF Standard, 10th Edition, Part I: Introduction, Chapter 3: Definitions. 3: TOGAF Standard, 10th Edition, Part II: Architecture Development Method, Chapter 16: Phase E: Opportunities and Solutions, and Chapter 17: PhaseF: Migration Planning. : TOGAF Standard, 10th Edition, Part II: Architecture Development Method, Chapter 13: Phase B:
Business Architecture, Chapter 14: Phase C: Information Systems Architecture, and Chapter 15: Phase D:
Technology Architecture.

QUESTION 99
Exhibit:

Consider the image showing basic architectural concepts.
What are items A and B?

A-Candidate Architecture, B-Trade-off

A-User, B-Requirement

A-Stakeholder, B-Concern

A-Base Architecture, B-Target Architecture

QUESTION 100
Consider the following statements:
1. Groups of countries, governments, or governmental organizations (such as militaries) working together to create common or shareable deliverables or infrastructures
2. Partnerships and alliances of businesses working together, such as a consortium or supply chain What are those examples of according to the TOGAF Standard?

Enterprises

Organizations

Business Units

Architectures Scopes

QUESTION 101
Which ADM Phase includes creation of an Enterprise Architecture Capability?

Phase A

Phase H

Phase G

Preliminary Phase

QUESTION 102
Which of the following best describes a purpose of the Gap Analysis technique?

To validate non-functional requirements

To establish quality metrics for the architecture

To determine service levels for the architecture

To identify missing functions

QUESTION 103
Complete the sentence. When considering agile development, Architecture to Support Portfolio will identify what products the Enterprise needs, the boundary of the products, and what constraints a product owner has; this defines the Enterprise’s

risk tolerance

business continuity

backlog

operating model

QUESTION 104
Exhibit

Consider the illustration showing an architecture development cycle Which description matches the phase of the ADM labeled as item 2?

Conducts implementation planning for the architecture defined in previous phases

Establishes procedures for managing change to the new architecture

Operates the process of managing architecture requirements

Provides architectural oversight for the implementation

QUESTION 105
What does the TOGAF ADM recommend for use in developing an Architecture Vision document?

Requirements Management

Architecture Principles

Gap Analysis

Business Scenarios

QUESTION 106
Consider the following ADM phases objectives.

Which phase does each objective match?

1F-2G-3G-4H

1H-2F-3F-4G

1F-2G-3H-4H

1G-2H-3H-4F

* According to the TOGAF Standard, Version 9.2, the ADM phases and their objectives are as follows1:
* Preliminary Phase: To prepare and initiate the architecture development cycle, including defining the architecture framework, principles, and governance.
* Phase A: Architecture Vision: To define the scope, vision, and stakeholders of the architecture initiative, and to obtain approval to proceed.
* Phase B: Business Architecture: To describe the baseline and target business architecture, and to identify the gaps between them.
* Phase C: Information Systems Architectures: To describe the baseline and target data and application architectures, and to identify the gaps between them.
* Phase D: Technology Architecture: To describe the baseline and target technology architecture, and to identify the gaps between them.
* Phase E: Opportunities and Solutions: To identify and evaluate the opportunities and solutions for implementing the target architecture, and to define the work packages and transition architectures.
* Phase F: Migration Planning: To finalize the implementation and migration plan, and to ensure alignment with the enterprise portfolio and project management.
* Phase G: Implementation Governance: To provide architecture oversight and guidance for the implementation projects, and to manage any architecture change requests.
* Phase H: Architecture Change Management: To monitor the changes in the business and technology environment, and to assess the impact and performance of the architecture.
* Requirements Management: To manage the architecture requirements throughout the ADM cycle, and to ensure alignment with the business requirements.
* Based on the above definitions, we can match each objective with the corresponding phase as follows:
* Objective 1: Ensure that the business value and cost of work packages and transition architectures is understood by key stakeholders. This objective is achieved in Phase H: Architecture Change Management, where the value realization and cost-benefit analysis of the architecture are performed2.
* Objective 2: Ensure conformance with the Target Architecture by implementation projects. This objective is achieved in Phase F: Migration Planning, where the conformance requirements and criteria for the implementation projects are defined3.
* Objective 3: Ensure that the architecture development cycle is maintained. This objective is achieved in Phase F: Migration Planning, where the architecture roadmap and iteration cycle are maintained3.
* Objective 4: Ensure that the Architecture Governance Framework is executed. This objective is achieved in Phase G: Implementation Governance, where the architecture governance processes and procedures are applied to the implementation projects4.
References:
* 1: The TOGAF Standard, Version 9.2, Chapter 5: Architecture Development Method (ADM)
* 2: The TOGAF Standard, Version 9.2, Chapter 21: Architecture Change Management
* 3: The TOGAF Standard, Version 9.2, Chapter 20: Migration Planning
* 4: The TOGAF Standard, Version 9.2, Chapter 19: Implementation Governance

QUESTION 107
Scenario:
You are working as an Enterprise Architect within a company providing legal services. The company operates in many countries and has a complicated structure. Every office must follow the local regulations in their country.
The company’s Enterprise Architecture (EA) department has been operating for several years and has mature, well-developed architecture governance and development processes based on the TOGAF standard. In addition to the EA program, the company has several management frameworks, including business planning, project/portfolio management, and operations management. The Architecture Board includes representatives from all parts of the company.
The Chief Information Officer (CIO) is the sponsor of the Enterprise Architecture program. The CIO has actively encouraged architecting with agility within the EA department as the preferred approach for projects.
The CIO has given approval for a Request for Architecture Work to explore the adoption of an AI-powered system for managing legal cases and financial processes.
Senior management has become more concerned about business performance, especially with the advancements in Artificial Intelligence (AI). Many of the company’s competitors have started using AI to assist with legal strategies, streamline processes, and boost productivity. One of the most important benefits AI has for the business is its ability to increase accuracy and minimize mistakes.
Some of the top managers are worried about a change in the way of working, and if it will achieve the business goals. Their staff also fear that management will use the AI system to measure their performance.
The CIO wants to know how to address these concerns and reduce risks.
The new system is expected to guide legal professionals and analysts on which tasks to focus on. The main goals are to improve productivity and make better use of staff. In addition, the CIO hopes these changes will lead to higher customer satisfaction.
Refer to the scenario:
You have been asked to respond to the Chief Information Officer (CIO) recommending an approach that would enable the development of an architecture that addresses the concerns of the top managers and the multiple branches in different parts of the company.
Based on the TOGAF standard, which of the following is the best answer?

You recommend that models be created for each of the Business, Application, and Technology architectures. These can be used to ensure that the system will be compliant with the local regulations for each operating entity. This ensures that all necessary data and detail is addressed. A formal review should be held with the stakeholders to verify that their concerns have been properly addressed by the models.

You recommend that an analysis of the stakeholders is undertaken. This will allow the architects to define groups of partners (the stakeholders) who have common concerns and include development of a Stakeholder Map. The concerns and relevant views should then be defined for each group and recorded in the Architecture Vision document. To reduce risk, you include a requirement that there be progressive development of the target architecture to get regular feedback.

You recommend creation of a set of business models that can be applied uniformly across all AI-related architecture projects. These should be developed in a portable format to ensure maximum portability across the many tools used in the firm. Each architecture should then be defined based on this fixed set of models. All concerned stakeholders can then examine the models to ensure that their needs have been addressed.

You recommend that a Communications Plan be created to address the key stakeholders, particularly influential partners. This plan should include a report summarizing the key features of the architecture with respect to each location and reflect the stakeholders’ requirements. You will check with each key stakeholder that their concerns have been addressed. Risk mitigation should be explicitly addressed as a component of the architecture being developed.

QUESTION 108
Please read this scenario prior to answering the question
Your role is that of a consultant to the Lead Enterprise Architect in a multinational automotive manufacturer.
The company has a corporate strategy that focuses on electrification of its portfolio, and it has invested heavily in a new shared car platform to use across all its brands. The company has four manufacturing facilities, one in North America, two in Europe, and one in Asia.
A challenge that the company is facing is to scale up the number of vehicles coming off the production line to meet customer demand, while maintaining quality. There are significant supply chain shortages for electronic components, which are impacting production. In response to this the company has taken on new suppliers and has also taken design and production of the battery pack in-house.
The company has a mature Enterprise Architecture practice. The TOGAF standard is used for developing the process and systems used to design, manufacture, and test the battery pack. The Chief Information Officer and the Chief Operating Officer co-sponsor the Enterprise Architecture program.
As part of putting the new battery pack into production, adjustments to the assembly processes need to be made. A pilot project has been completed at a single location. The Chief Engineer, sponsor of the activity, and the Architecture Board have approved the plan for implementation and migration at each plant.
Draft Architecture Contracts have been developed that detail the work needed to implement and deploy the new processes for each location. The company mixes internal teams with a few third-party contractors at the locations. The Chief Engineer has expressed concern that the deployment will not be consistent and of acceptable quality.
Refer to the scenario
The Lead Enterprise Architect has asked you to review the draft Architecture Contracts and recommend the best approach to address the Chief Engineer’s concern.
Based on the TOGAF Standard, which of the following is the best answer?

For changes requested by an internal team, you recommend a memorandum of understanding between the Architecture Board and the implementation organization. For contracts issued to third- party contractors, you recommend that it is a fully enforceable legal contract. You recommend that the Architecture Board reviews all deviations from the Architecture Contract and considers whether to grant a dispensation to allow the implementation organization to customize the process to meet their local needs.

For changes undertaken by internal teams, you recommend a memorandum of understanding between the Architecture Board and the implementation organization. If a contract is issued to a contractor, you recommend that it is a fully enforceable legal contract. If a deviation from the Architecture Contract is found, you recommend that the Architecture Board grant a dispensation to allow the implementation organization to customize the process to meet their local needs.

You review the contracts ensuring that they address project objectives, effectiveness metrics, acceptance criteria, and risk management. Third-party contracts must be legally enforceable. You recommend a schedule of compliance reviews at key points in the implementation process. You recommend that the Architecture Board reviews all deviations from the Architecture Contract and considers whether to grant a dispensation to allow the process to be customized for local needs.

You recommend that the Architecture Contracts be used to manage the architecture governance processes across the locations. You recommend deployment of monitoring tools to assess the performance of each completed battery pack at each location and develop change requirements if necessary. If a deviation from the contract is detected, the Architecture Board should allow the Architecture Contract to be modified meet the local needs. In such cases they should issue a new Request for Architecture Work to implement a modification to the Architecture Definition.

According to the TOGAF Standard, Version 9.2, an Architecture Contract is a joint agreement between development partners and sponsors on the deliverables, quality, and fitness-for-purpose of an architecture1. It defines the scope, responsibilities, and governance of the architecture work, and ensures the alignment and compliance of the architecture with the business goals and objectives1.
In the scenario, the Lead Enterprise Architect has asked you to review the draft Architecture Contracts and recommend the best approach to address the Chief Engineer’s concern about the consistency and quality of the deployment of the new processes for the battery pack production at each location.
The best answer is C, because it follows the guidelines and best practices for defining and using Architecture Contracts as described in the TOGAF Standard, Version 9.22. It ensures that the contracts cover the essential aspects of the project objectives, effectiveness metrics, acceptance criteria, and risk management, and that they are legally enforceable for third-party contractors. It also recommends a schedule of compliance reviews at key points in the implementation process, and a mechanism for handling any deviations from the Architecture Contract, involving the Architecture Board and the possibility of granting a dispensation to allow the process to be customized for local needs.
The other options are not correct because they either23:
A . For changes requested by an internal team, you recommend a memorandum of understanding between the Architecture Board and the implementation organization. For contracts issued to third-party contractors, you recommend that it is a fully enforceable legal contract. You recommend that the Architecture Board reviews all deviations from the Architecture Contract and considers whether to grant a dispensation to allow the implementation organization to customize the process to meet their local needs.: This option does not address the need to review the contracts to ensure that they address the project objectives, effectiveness metrics, acceptance criteria, and risk management. It also does not recommend a schedule of compliance reviews at key points in the implementation process. Moreover, it suggests that a memorandum of understanding is sufficient for internal teams, which may not be legally binding or enforceable.
B . For changes undertaken by internal teams, you recommend a memorandum of understanding between the Architecture Board and the implementation organization. If a contract is issued to a contractor, you recommend that it is a fully enforceable legal contract. If a deviation from the Architecture Contract is found, you recommend that the Architecture Board grant a dispensation to allow the implementation organization to customize the process to meet their local needs.: This option has the same problems as option A, and also implies that the Architecture Board should always grant a dispensation for any deviation, which may not be appropriate or desirable in some cases.
D . You recommend that the Architecture Contracts be used to manage the architecture governance processes across the locations. You recommend deployment of monitoring tools to assess the performance of each completed battery pack at each location and develop change requirements if necessary. If a deviation from the contract is detected, the Architecture Board should allow the Architecture Contract to be modified meet the local needs. In such cases they should issue a new Request for Architecture Work.: This option does not address the need to review the contracts to ensure that they address the project objectives, effectiveness metrics, acceptance criteria, and risk management. It also does not recommend a schedule of compliance reviews at key points in the implementation process. Moreover, it suggests that the Architecture Board should always allow the Architecture Contract to be modified for any deviation, which may not be appropriate or desirable in some cases. It also implies that a new Request for Architecture Work should be issued for each deviation, which may not be necessary or feasible.
Reference:
1: The TOGAF Standard, Version 9.2, Chapter 3: Definitions and Terminology, Section 3.1: Terms and Definitions
2: The TOGAF Standard, Version 9.2, Chapter 43: Architecture Contracts
3: The TOGAF Standard, Version 9.2, Chapter 44: Architecture Governance

QUESTION 109
What is presented as “striking a balance between positive and negative outcomes resulting from the realization of either opportunities or threats?

Agile development

Architecture Security

Transition Management

Risk Management

QUESTION 110
Which of the following statements about architecture partitioning is correct?

Partitions are used to simplify the management of the Enterprise Architecture.

Partitions are equivalent to architecture levels.

Partitions reflect the organization’s structure.

Partitions are defined and assigned to agile Enterprise Architecture teams.

QUESTION 111
Please read this scenario prior to answering the question
You are working as the Chief Enterprise Architect within a law firm specializing in personal injury cases.
Many of the firm’s competitors have improved their litigation strategies, and efficiency by streamlining their processes using Artificial Intelligence {Al).
The CIO has approved a Request for Architecture Work to examine the use of Machine Learning in defining a new Al-driven litigation and finance process for the firm. This process would instruct the lawyers and analysts as to what tasks and portfolio they should work on. The key objectives are to increase task profitability, maximize staff utilization, and increase individual profitability.
The CIO has emphasized that the architecture should enable the fast implementation of continuous Machine Learning. The solution will need to be constantly measured for delivered value and be quickly iterated to success.
Some of the partners have expressed concerns about letting the Al make the decisions, others about the risks associated with use of it for the type of service they deliver. The CIO wants to know if these concerns can be addressed, and how risks will be covered by a new architecture enabling Al and Machine Learning.
Refer to the scenario
You have been asked to respond to the CIO recommending an approach that would enable the development of an architecture that addresses the concerns of the CIO and the concerns of the partners.
Based on the TOGAF standard which of the following is the best answer?

You recommend that a Communications Plan be created to address the key stakeholders, the most powerful and influential partners. This plan should include a report that summarizes the key features of the architecture reflecting their requirements. You will check with each key stakeholder that their concerns are being addressed. Risk mitigation and agility will be explicitly addressed as a component of the architecture being developed.

You recommend that an analysis of the stakeholders is undertaken resulting in documenting the stakeholders and their concerns in a Stakeholder Map. The concerns and relevant views should then be defined for each group and recorded in the Architecture Vision document. The requirements will include risk mitigation through regular assessments. This will also allow a supervised agile implementation of the continuous Machine Learning.

You recommend that all possible models be created for each candidate architecture that will enable the Al and Machine Learning solution. This ensures that all the necessary data and detail is addressed. A formal review should be held with the stakeholders to verify that their concerns have been properly addressed by the models. Agility will be considered during Phase G Implementation Governance.

You recommend creation of a set of business models that can be applied uniformly across all architecture projects. The stakeholders will be trained to understand the business models to ensure they can see that their concerns are being addressed. Risk will be addressed once the Security Architecture is developed, which will happen later to avoid slowing down the agility required by the CIO.

Explanation
A Stakeholder Map is a technique that can be used to identify and classify the stakeholders of the architecture work, and to document their key interests, requirements, and concerns. A stakeholder is any person, group, or organization that has a stake in the outcome of the architecture work, such as the sponsor, the client, the users, the suppliers, the regulators, or the competitors. A Stakeholder Map can help to understand the needs and expectations of the stakeholders, and to communicate and engage with them effectively1 The steps for creating a Stakeholder Map are:
Identify the stakeholders of the architecture work, using various sources and methods, such as interviews, surveys, workshops, or existing documents.
Classify the stakeholders according to their roles, responsibilities, and relationships, using various criteria and dimensions, such as power, influence, interest, attitude, or impact.
Define the concerns and relevant views for each stakeholder group, using various techniques, such as business scenarios, use cases, or value propositions. A concern is a key interest or issue that is relevant to the stakeholder, such as a goal, a problem, a need, or a risk. A view is a representation of the system of interest from the perspective of one or more stakeholders and their concerns.
Record the stakeholders and their concerns in a Stakeholder Map, which shows the mapping between the stakeholder groups, the concerns, and the views. The Stakeholder Map also shows the dependencies, assumptions, and issues related to each stakeholder and concern.
Therefore, the best answer is B, because it recommends the approach that would enable the development of an architecture that addresses the concerns of the CIO and the partners, using the Stakeholder Map technique. The answer covers the following aspects:
An analysis of the stakeholders is undertaken, which involves identifying, classifying, and defining the stakeholders and their concerns.
The stakeholders and their concerns are documented in a Stakeholder Map, which provides a clear and comprehensive picture of the stakeholder landscape and their interests.
The concerns and relevant views are recorded in the Architecture Vision document, which is the output of Phase A: Architecture Vision of the Architecture Development Method (ADM), which is the core process of the TOGAF standard that guides the development and management of the enterprise architecture. The Architecture Vision defines the scope and approach of the architecture work, and establishes the business goals and drivers that motivate the architecture work. The Architecture Vision also involves obtaining the approval and commitment of the sponsors and other key stakeholders, and initiating the Architecture Governance process2 The requirements include risk mitigation through regular assessments, which involves identifying, analyzing, and evaluating the risks that may affect the architecture, and determining the appropriate measures or actions to prevent, reduce, or mitigate the risks. Risk mitigation can also involve monitoring and reviewing the risk situation, and communicating and reporting the risk status and actions3 This approach also allows a supervised agile implementation of the continuous Machine Learning, which involves applying agile principles and practices to the architecture development and implementation, such as iterative and incremental delivery, frequent feedback, collaboration, and adaptation. A supervised agile implementation can help to ensure the quality, value, and alignment of the architecture, and to respond to the changing needs and expectations of the stakeholders.
References: 1: The TOGAF Standard, Version 9.2, Part III: ADM Guidelines and Techniques, Chapter 24:
Stakeholder Management 2: The TOGAF Standard, Version 9.2, Part II: Architecture Development Method (ADM), Chapter 18: Phase A: Architecture Vision 3: The TOGAF Standard, Version 9.2, Part III: ADM Guidelines and Techniques, Chapter 32: Risk Management : The TOGAF Standard, Version 9.2, Part III:
ADM Guidelines and Techniques, Chapter 29: Applying Iteration to the ADM

QUESTION 112
Exhibit
Consider the illustration showing an architecture development cycle Which description matches the phase of the ADM labeled as item 2?

Conducts implementation planning for the architecture defined in previous phases

Establishes procedures for managing change to the new architecture

Operates the process of managing architecture requirements

Provides architectural oversight for the implementation

Quiz Training Materials

Pass Authentic The Open Group OGEA-103 with Free Practice Tests and Exam Dumps [Q92-Q112]

[Jul 09, 2024] New Updated OGEA-101 Exam Questions 2024 [Q20-Q35]

[Oct 22, 2024] 100% Latest Most updated OGEA-101 Questions and Answers [Q11-Q35]

Leave a Reply Cancel reply

Quiz Training Materials

Pass Authentic The Open Group OGEA-103 with Free Practice Tests and Exam Dumps [Q92-Q112]

You May Also Like...

[Jul 09, 2024] New Updated OGEA-101 Exam Questions 2024 [Q20-Q35]

[Oct 22, 2024] 100% Latest Most updated OGEA-101 Questions and Answers [Q11-Q35]

Leave a Reply Cancel reply