Online Questions – Valid Practice 156-215.80 Exam Dumps Test Questions [Q308-Q324]

Rate this post

Online Questions – Valid Practice 156-215.80 Exam Dumps Test Questions

100% Real 156-215.80 dumps – Brilliant 156-215.80 Exam Questions PDF

How to study the 156-215.80 Exam

TrainingQuiz expert team recommends you to prepare some notes on these topics along with it don’t forget to practice Check Point Certified Security Administrator (CCSA R80) 156-215.80 Exam exam dumps which been written by our expert team, Both these will help you a lot to clear this exam with good marks.

NEW QUESTION 308
Where does the security administrator activate Identity Awareness within
SmartDashboard?

Gateway Object > General Properties

Security Management Server > Identity Awareness

Policy > Global Properties > Identity Awareness

LDAP Server Object > General Properties

NEW QUESTION 309
A client has created a new Gateway object that will be managed at a remote location.
When the client attempts to install the Security Policy to the new Gateway object, the object does not appear in the Install On check box. What should you look for?

Secure Internal Communications (SIC) not configured for the object.

A Gateway object created using the Check Point > Externally Managed VPN Gateway option from the Network Objects dialog box.

Anti-spoofing not configured on the interfaces on the Gateway object.

A Gateway object created using the Check Point > Secure Gateway option in the network objects, dialog box, but still needs to configure the interfaces for the Security
Gateway object.

NEW QUESTION 310
When a policy package is installed, ________ are also distributed to the target installation Security Gateways.

User and objects databases

Network databases

SmartConsole databases

User databases

A policy package is a collection of different types of policies. After installation, the Security Gateway enforces all the policies in the package. A policy package can have one or more of these policy types:
The installation process:
If there are verification errors, the policy is not installed. If there are verification warnings (for example, if anti-spoofing is not enabled for a Security Gateway with multiple interfaces), the policy package is installed with a warning.

NEW QUESTION 311
What are the two types of NAT supported by the Security Gateway?

Destination and Hide

Hide and Static

Static and Source

Source and Destination

A Security Gateway can use these procedures to translate IP addresses in your network:
* Static NAT – Each internal IP address is translated to a different public IP address. The Firewall can allow external traffic to access internal resources.
* Hide NAT – The Firewall uses port numbers to translate all specified internal IP addresses to a single public IP address and hides the internal IP structure. Connections can only start from internal computers, external computers CANNOT access internal servers. The Firewall can translate up to 50,000 connections at the same time from external computers and servers.
* Hide NAT with Port Translation – Use one IP address and let external users access multiple application servers in a hidden network. The Firewall uses the requested service (or destination port) to send the traffic to the correct server. A typical configuration can use these ports: FTP server (port 21), SMTP server (port
25) and an HTTP server (port 80). It is necessary to create manual NAT rules to use Port Translation.
Reference:
https://sc1.checkpoint.com/documents/R76/CP_R76_Firewall_WebAdmin/6724.htm

NEW QUESTION 312
Fill in the blank: A _________ VPN deployment is used to provide remote users with secure access to internal corporate resources by authenticating the user through an internet browser.

Clientless remote access

Clientless direct access

Client-based remote access

Direct access

Explanation
Clientless – Users connect through a web browser and use HTTPS connections. Clientless solutions usually supply access to web-based corporate resources.

NEW QUESTION 313
MegaCorp’s security infrastructure separates Security Gateways geographically. You must request a central license for one remote Security Gateway.
How do you apply the license?

Using the remote Gateway’s IP address, and attaching the license to the remote
Gateway via SmartUpdate.

Using your Security Management Server’s IP address, and attaching the license to the remote Gateway via SmartUpdate.

Using the remote Gateway’s IP address, and applying the license locally with command cplic put.

Using each of the Gateway’s IP addresses, and applying the licenses on the Security
Management Server with the command cprlic put.

NEW QUESTION 314
Vanessa is firewall administrator in her company; her company is using Check Point firewalls on central and remote locations, which are managed centrally by R80 Security Management Server. One central location has an installed R77.30 Gateway on Open server. Remote location is using Check Point UTM-1 570 series appliance with R71. Which encryption is used in Secure Internal Communication (SIC) between central management and firewall on each location?

On central firewall AES128 encryption is used for SIC, on Remote firewall 3DES encryption is used for SIC.

On both firewalls, the same encryption is used for SIC. This is AES-GCM-256.

The Firewall Administrator can choose which encryption suite will be used by SIC.

On central firewall AES256 encryption is used for SIC, on Remote firewall AES128 encryption is used for SIC.

Explanation
Gateways above R71 use AES128 for SIC. If one of the gateways is R71 or below, the gateways use 3DES.
References:

NEW QUESTION 315
Fill in the blanks: A High Availability deployment is referred to as a ______ cluster and a Load Sharing deployment is referred to as a ________ cluster.

Standby/standby; active/active

Active/active; standby/standby

Active/active; active/standby;

Active/standby; active/active

Explanation
In a High Availability cluster, only one member is active (Active/Standby operation).
ClusterXL Load Sharing distributes traffic within a cluster so that the total throughput of multiple members is increased. In Load Sharing configurations, all functioning members in the cluster are active, and handle network traffic (Active/Active operation).

NEW QUESTION 316
What are the two types of address translation rules?

Translated packet and untranslated packet

Untranslated packet and manipulated packet

Manipulated packet and original packet

Original packet and translated packet

Explanation
NAT Rule Base
The NAT Rule Base has two sections that specify how the IP addresses are translated:
Original Packet
Translated Packet
References:

NEW QUESTION 317
Which of the following blades is NOT subscription-based and therefore does not have to be renewed on a regular basis?

Application Control

Threat Emulation

Anti-Virus

Advanced Networking Blade

NEW QUESTION 318
There are ________ types of software containers ________.

Three; security management, Security Gateway, and endpoint security

Three; Security gateway, endpoint security, and gateway management

Two; security management and endpoint security

Two; endpoint security and Security Gateway

Explanation
There are three types of Software Containers: Security Management, Security Gateway, and Endpoint Security.

NEW QUESTION 319
Administrator Kofi has just made some changes on his Management Server and then clicks on the Publish button in SmartConsole but then gets the error message shown in the screenshot below.
Where can the administrator check for more information on these errors?

The Log and Monitor section in SmartConsole

The Validations section in SmartConsole

The Objects section in SmartConsole

The Policies section in SmartConsole

Explanation/Reference:
Explanation: Validation Errors
The validations pane in SmartConsole shows configuration error messages. Examples of errors are object names that are not unique, and the use of objects that are not valid in the Rule Base.
To publish, you must fix the errors.
Reference:
https://sc1.checkpoint.com/documents/R80/CP_R80_SecMGMT/html_frameset.htm?topic=documents/ R80/CP_R80_SecMGMT/126197

NEW QUESTION 320
Which of the following is NOT a set of Regulatory Requirements related to Information Security?

ISO 37001

Sarbanes Oxley (SOX)

HIPPA

PCI

ISO 37001 – Anti-bribery management systemsReference:
http://www.iso.org/iso/home/standards/management-standards/iso37001.htm

NEW QUESTION 321
What is Identity Sharing?

Management servers can acquire and share identities with Security Gateways

Users can share identities with other users

Security Gateways can acquire and share identities with other Security Gateways

Administrators can share identifies with other administrators

Identity Sharing
Best Practice – In environments that use many Security Gateways and AD Query, we recommend that you set only one Security Gateway to acquire identities from a given Active Directory domain controller for each physical site. If more than one Security Gateway gets identities from the same AD server, the AD server can become overloaded with WMI queries.
Set these options on the Identity Awareness > Identity Sharing page of the Security Gateway object:
* One Security Gateway to share identities with other Security Gateways. This is the Security Gateway that gets identities from a given domain controller.
* All other Security Gateways to get identities from the Security Gateway that acquires identities from the given domain controller.
Reference:
https://sc1.checkpoint.com/documents/R80.10/WebAdminGuides/EN/
CP_R80.10_IdentityAwareness_AdminGuide/html_frameset.htm?topic=documents/R80.10/ WebAdminGuides/EN/CP_R80.10_IdentityAwareness_AdminGuide/63005

NEW QUESTION 322
Mesh and Star are two types of VPN topologies. Which statement below is TRUE about these types of communities?

A star community requires Check Point gateways, as it is a Check Point proprietary technology.

In a star community, satellite gateways cannot communicate with each other.

In a mesh community, member gateways cannot communicate directly with each other.

In a mesh community, all members can create a tunnel with any other member.

NEW QUESTION 323
Consider the Global Properties following settings:

The selected option “Accept Domain Name over UDP (Queries)” means:

UDP Queries will be accepted by the traffic allowed only through interfaces with external anti-spoofing topology and this will be done before first explicit rule written by Administrator in a Security Policy.

All UDP Queries will be accepted by the traffic allowed through all interfaces and this will be done before first explicit rule written by Administrator in a Security Policy.

No UDP Queries will be accepted by the traffic allowed through all interfaces and this will be done before first explicit rule written by Administrator in a Security Policy.

All UDP Queries will be accepted by the traffic allowed by first explicit rule written by Administrator in a Security Policy.

NEW QUESTION 324
If there are two administrators logged in at the same time to the SmartConsole, and there are objects locked for
editing, what must be done to make them available to other administrators? Choose the BEST answer.

Publish or discard the session.

Revert the session.

Save and install the Policy.

Delete older versions of database.

Explanation
To make changes available to all administrators, and to unlock the objects and rules that are being edited, the
administrator must publish the session.
To make your changes available to other administrators, and to save the database before installing a policy,
you must publish the session. When you publish a session, a new database version is created.
When you select Install Policy, you are prompted to publish all unpublished changes. You cannot install a
policy if the included changes are not published.

Loading …

156-215.80 Exam PDF [2022] Tests Free Updated Today with Correct 527 Questions: https://www.trainingquiz.com/156-215.80-practice-quiz.html

Previous Article 70 Q&As in UPDATED AD0-E406 Exam Questions Certification Test Engine to PDF [Q36-Q55]

Next Article New 2022 Realistic Free Okta Okta-Certified-Administrator Exam Dump Questions & Answer [Q69-Q87]

[Aug 03, 2023] New CheckPoint 156-215.81 Dumps with Test Engine and PDF (New Questions) [Q53-Q69]

156-215.81, CheckPoint August 3, 2023

[Aug 03, 2023] New CheckPoint 156-215.81 Dumps with Test Engine and PDF (New Questions) Pass Your 156-215.81 Exam Easily –

Pass Exam With Full Sureness – 156-581 Dumps with 93 Questions [Q46-Q68]

156-581, CheckPoint January 30, 2024

Pass Exam With Full Sureness – 156-581 Dumps with 93 Questions Verified 156-581 dumps Q&As – 100% Pass from TrainingQuiz

Quiz Training Materials

Online Questions – Valid Practice 156-215.80 Exam Dumps Test Questions [Q308-Q324]

How to study the 156-215.80 Exam

[Aug 03, 2023] New CheckPoint 156-215.81 Dumps with Test Engine and PDF (New Questions) [Q53-Q69]

Pass Exam With Full Sureness – 156-581 Dumps with 93 Questions [Q46-Q68]

Leave a Reply Cancel reply

Quiz Training Materials

Online Questions – Valid Practice 156-215.80 Exam Dumps Test Questions [Q308-Q324]

How to study the 156-215.80 Exam

You May Also Like...

[Aug 03, 2023] New CheckPoint 156-215.81 Dumps with Test Engine and PDF (New Questions) [Q53-Q69]

Pass Exam With Full Sureness – 156-581 Dumps with 93 Questions [Q46-Q68]

Leave a Reply Cancel reply