Verified 1Y0-440 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump from TrainingQuiz [Q55-Q72]

NEW QUESTION 55

Which IP address should be bound to VLAN 11?

NEW QUESTION 56
Scenario: A Citrix Architect needs to assess an existing NetScaler gateway deployment. During the assessment, the architect collected key requirements for VPN users, as well as the current session profile settings that are applied to those users.
Click the Exhibit button to view the information collected by the architect.

Which configuration should the architect change to meet all the stated requirements?

NEW QUESTION 57
Scenario: A Citrix Architect has setup Citrix ADC MPX devices in high availability mode with version
12.0.53.13 nc. These are placed behind a Cisco ASA 5505 firewall. The Cisco ASA firewall is configured to block traffic using access control lists. The network address translation (NAT) is also performed on the firewall. The following requirements were captured by the architect during the discussion held as part of the Citrix ADC security implementation project with the customer’s security team: The Citrix ADC MPX device:
* should monitor the rate of traffic either on a specific virtual entity or on the device. It should be able to mitigate the attacks from a hostile client sending a flood of requests. The Citrix ADC device should be able to stop the HTTP. TOP, and DNS based requests.
* needs to protect backend servers from overloading.
* needs to queue all the incoming requests on the virtual server level instead of the service level.
* should provide access to resources on the basis of priority.
* should provide protection against well-known Windows exploits, virus-infected personal computers, centrally managed automated botnets. compromised webservers, known spammersThackers. and phishing proxies.
* should provide flexibility to enforce the desired level of security check inspections for the requests originating from a specific geolocation database.
* should block the traffic based on predetermined header length, URL length, and cookie length.The device should ensure that characters such as a single straight quote (‘) backslash (); and semicolon (;) are either blocked, transformed, or dropped being sent to the backend server.
Which security feature should the architect implement to meet these requirements?

NEW QUESTION 58
Scenario: A Citrix Architect has configured two MPX devices in high availability mode with version
12.0.53.13 nc. After a discussion with the security team, the architect enabled the Application Firewall feature for additional protection.
In the initial deployment phase, the following security features were enabled:
* IP address reputation
* HTML SQL injection check
* Start URL
* HTML Cross-site scripting
* Form-field consistency
* After deployment in pre-production, the team identifies the following additional security features and changes as further requirements:
* Application Firewall should retain the response of form field in its memory. When a client submits the form in the request, Application Firewall should check for inconsistencies in the request before sending it to the web server.
* All the requests dropped by Application Firewall should get a pre-configured HTML error page with appropriate information.
* The Application Firewall profile should be able to handle the data from the RSS feed and an ATOM-based site. Click the Exhibit button to view an excerpt of the existing configuration.

What should the architect do to meet these requirements?

NEW QUESTION 59
Which session parameter does the default authorization setting control when authentication, authorization, and auditing profiles are configured?

NEW QUESTION 60
Scenario: A Citrix Architect needs to assess an existing NetScaler multi-site deployment. The deployment is using Global Server Load Balancing (GSLB) configured in a parent-child configuration.
Click the Exhibit button to view the diagram of the current GSLB configuration and parent-child relationships, as well as the status of the sites and the connectivity between them.

Based on the displayed configuration and status, Chil_site1_______ a connection from _______. (Choose the correct option to complete the sentence.)

NEW QUESTION 61
Which three parameters must a Citrix Architect designate when creating a new session policy? (Choose three.)

NEW QUESTION 62
Which parameter indicates the number of current users logged on to the NetScaler gateway?

NEW QUESTION 63
Scenario: A Citrix Architect is asked by management at the Workslab organization to review their existing configuration and make the necessary upgrades. The architect recommends small changes to the pre-existing NetScaler configuration. Currently, the NetScaler MPX devices are configured in a high availability pair, and the outbound traffic is load-balanced between two Internet service providers 9ISPs). However, the failover is NOT happening correctly.
The following requirements were discussed during the design requirements phase:
* The return traffic for a specific flow should be routed through the same path while using Link Load Balancing.
* The link should fail over if the ISP router is up and intermediary devices to an ISP router are down.
* Traffic going through one ISP router should fail over to the secondary ISP, and the traffic should NOT flow through both routers simultaneously.
What should the architect configure with Link Load balancing (LLB) to meet this requirement?

NEW QUESTION 64
Scenario: A Citrix Architect needs to assess a Citrix Gateway deployment that was recently completed by a customer and is currently in pre-production testing. The Citrix Gateway needs to use ICA proxy to provide access to a Citrix Virtual Apps and Citrix Virtual Desktops environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.
Click the Exhibit button to view the troubleshooting details collected by the customer.

What is the cause of this issue?

NEW QUESTION 65
Scenario: A Citrix Architect and a team of Workspacelab members met to discuss a Citrix ADC design project. They captured the following requirements from this design discussion:
* All three (3) Workspacelab sites (DC, NOR, and DR) will have similar Citrix ADC configurations and design.
* The external Citrix ADC MPX1 appliances will have Global Server Load Balancing (GSLB) configured and deployed in Active/Active mode.
* ADNS service should be configured on the Citrix ADC to make it authoritative for domain nsg.workspacelab.com * In GSLB deployment, the DNS resolution should be performed to connect the user to the site with least network latency.
* On the internal Citrix ADC, load balancing for StoreFront services, Citrix XML services, and Citrix Director services must be configured.
* On the external Citrix ADC, the Gateway virtual server must be configured in ICA proxy mode.
Click the Exhibit button to view the logical representation of the network.

On which firewall should the architect configure the access policy to permit the MEP communication between the sites?

NEW QUESTION 66
Scenario: A Citrix Architect has configured NetScaler Gateway integration with a XenApp environment to provide access to users from two domains: vendorlab.com and workslab.com. The Authentication method used is LDAP.
Which two steps are required to achieve Single Sign-on StoreFront using a single store? (Choose two.)

NEW QUESTION 67
Scenario: A Citrix Architect needs to design a hybrid Citrix Virtual App and Citrix Virtual Desktop environment which will include Citrix Cloud as well as resource locations in an on-premises datacenter and Microsoft Azure.
Organizational details and requirements are as follows:
* Active Citrix Virtual App and Citrix Virtual Desktops Service subscription
* No existing NetScaler deployment
* Global Server Load Balancing is used to direct connection requests to Location B, if the StoreFront server in Location B fails, connections should be directed to Location A.
Click the Exhibit button to view the conceptual environment architecture.

The architect should use _____ in Location A, and should use ________ in Location B.
(Choose the correct option to complete the sentence.)

NEW QUESTION 68
Which three steps should a Citrix Architect complete to configure session settings for different user accounts or groups? (Choose three.)

NEW QUESTION 69
Which parameter must a Citrix Architect configure to ensure that HDX Proxy Connection terminates upon AAA Session TimeOut?

NEW QUESTION 70
Scenario: A Citrix Architect needs to assess a Citrix Gateway deployment that was recently completed by a customer and is currently in pre-production testing. The Citrix Gateway needs to use ICA proxy to provide access to a Citrix Virtual Apps and Citrix Virtual Desktops environment. During the assessment, the customer informs the architect that users are NOT able to launch published resources using the Gateway virtual server.
Click the Exhibit button to view the troubleshooting details collected by the customer.

What is the cause of this issue?

NEW QUESTION 71
Which request can a Citrix Architect utilize to create a NITRO API command to add a NetScaler appliance with NSIP address 10.102.29.60 to the cluster?

NEW QUESTION 72
Scenario: A Citrix Architect needs to configure a full VPN session profile to meet the following requirements:
* Users should be able to send the traffic only for the allowed networks through the VPN tunnel.
* Only the DNS requests ending with the configured DNS suffix workspacelab.com must be sent to NetScaler Gateway.
* If the DNS query does NOT contain a domain name, then DNS requests must be sent to NetScaler gateway.
Which settings will meet these requirements?