Brilliant 350-401 Exam Dumps Get 350-401 Dumps PDF [Q90-Q109]

4/5 - (1 vote)

Brilliant 350-401 Exam Dumps Get 350-401 Dumps PDF

350-401 Dumps PDF – 350-401 Real Exam Questions Answers

Further Certification Path After Passing 350-401

The Cisco 350-401 ENCOR certification exam is the starting point for different certifications. If you want to go further than being a certified Specialist for Enterprise Core, then you should know that it is also a core exam for the CCNP Enterprise certificate. From here, you will need to take a concentration test to get accredited.

If CCNP accreditation is not the final target point for you, then use Cisco 350-401 ENCOR as the qualifying exam to obtain CCIE Enterprise Infrastructure or Enterprise Wireless accreditation. These will require you to ace one more test as well.

NO.90 Refer to the exhibit.

What is the JSON syntax that is formed the data?

Name: Bob, Johnson, Age: 76, Alive: true, Favourite Foods. [Cereal, “Mustard”, “Onions}}

Name’, ‘Bob Johnson,’ ‘Age’, 76, ‘Alive’, true, ‘favourite Foods’ ‘Cereal Mustard’, ‘Onions’}

{“Name”:”Bob Johnson”,”age”:76,”alive”:true,”favorite
foods”:[“Cereal”,”Mustard”,”Onions”]}correct

Name”, “Bob Johnson”, “Age”, 76, “Alive”, true, “favourite Foods”, [“Cereal, “Mustard”, Onions”}}

Name”, “Bob Johnson”, “Age”: Seventysix, “Alive” true, “favourite Foods” ,[Cereal” “Mustard” “Onions”}}

NO.91 Drag and drop the characteristics from the left onto the infrastructure deployment models they describe on the right.

NO.92 Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?

security group tag ACL assigned to each port on a switch

security group tag number assigned to each user on a switch

security group tag number assigned to each port on a network

security group tag ACL assigned to each router on a network

Explanation/Reference: https://www.cisco.com/c/dam/en/us/solutions/collateral/borderless-networks/trustsec/C07-730151-
00_overview_of_trustSec_og.pdf

NO.93 Refer to the exhibit.

An engineer entered the command no spanning-tree bpduguard enable on interface Fa 1/0/7. What is the effect of this command on Fa 1/0/7?

It remains in err-disabled state until the shutdown/no shutdown command is entered in the interface configuration mode.

It remains in err-disabled state until the errdisable recovery cause failed-port-state command is entered in the global configuration mode.

It remains in err-disabled state until the no shutdown command is entered in the interface configuration mode.

It remains in err-disabled state until the spanning-tree portfast bpduguard disable command is entered in the interface configuration mode.

Explanation

NO.94 In OSPF, which LSA type is responsible for pointing to the ASBR router?

type 1

type 2

type 3

type 4

NO.95 Which outbound access list, applied to the WAN interface of a router, permits all traffic except for http traffic sourced from the workstation with IP address 10.10.10.1?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NO.96 What the role of a fusion in an SD-Access solution?

provides connectivity to external networks

acts as a DNS server

performs route leaking between user-defined virtual networks and shared services

provides additional forwarding capacity to the fabric

NO.97 When configuration WPA2 Enterprise on a WLAN, which additional security component configuration is required?

NTP server

PKI server

RADIUS server

TACACS server

Deploying WPA2-Enterprise requires a RADIUS server, which handles the task of authenticating network users access. Theactual authentication process is based on the 802.1X policy and comes in several different systems labelled EAP. Becauseeach device is authenticated before it connects, a personal, encrypted tunnel is effectively created between the device andthe network.

NO.98 What is the differences between TCAM and the MAC address table?

The MAC address table is contained in CAM ACL and QoS information is stored in TCAM

The MAC address table supports partial matches. TCAM requires an exact match

Router prefix lookups happens in CAM. MAC address table lookups happen in TCAM.

TCAM is used to make Layer 2 forwarding decisions CAM is used to build routing tables

Explanation
https://community.cisco.com/t5/networking-documents/cam-content-addressable-memory-vs-tcam-ternary-conte When using Ternary Content Addressable Memory (TCAM) inside routers it’s used for faster address lookup that enables fast routing.
In switches Content Addressable Memory (CAM) is used for building and lookup of mac address table that enables L2 forwarding decisions.
Besides Longest-Prefix Matching, TCAM in today’s routers and multilayer Switch devices are used to store ACL, QoS and other things from upper-layer processing.

NO.99 Which two results occur if Cisco DNA Center loses connectivity to devices in the SD-Access fabric?
(Choose two )

All devices reload after detecting loss of connection to Cisco DNA Center

Already connected users are unaffected, but new users cannot connect

User connectivity is unaffected.

Cisco DNA Center is unable to collect monitoring data in Assurance.

Users lose connectivity

NO.100 Refer to Exhibit.

Which configuration must be applied to the HQ router to set up a GRE tunnel between the HQ and BR routers?

Option A

Option B

Option C

Option D

NO.101 Drag and drop the LISP components on the left to their descriptions on the right. Not all options are used.

NO.102 Drag and drop the virtual component from the left onto their descriptions on the right.

Explanation
+ configuration file containing settings for a virtual machine such as guest OS: VMX
+ component of a virtual machine responsible for sending packets to the hypervisor: vNIC
+ zip file containing a virtual machine configuration file and a virtual disk: OVA
+ file containing a virtual machine disk drive: VMDK
The VMX file simply holds the virtual machine configuration.
VMDK (short for Virtual Machine Disk) is a file format that describes containers for virtual hard disk drives to be used in virtual machines like VMware Workstation or VirtualBox.
An OVA file is an Open Virtualization Appliance that contains a compressed, “installable” version of a virtual machine. When you open an OVA file it extracts the VM and imports it into whatever virtualization software you have installed on your computer.

NO.103 To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?

Active

Passive

Auto

Explanation/Reference: https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669

NO.104 Refer to the exhibit.

SwitchC connects HR and Sales to the Core switch However, business needs require that no traffic from the Finance VLAN traverse this switch Which command meets this requirement?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NO.105 How does CEF switching differ from process switching on Cisco devices?

CEF switching saves memory by sorting adjacency tables in dedicate memory on the line cards, and process switching stores all tables in the main memory

CEF switching uses adjacency tables built by the CDP protocol, and process switching uses the routing table

CEF switching uses dedicated hardware processors, and process switching uses the main processor

CEF switching uses proprietary protocol based on IS-IS for MAC address lookup, and process switching uses in MAC address table

Cisco Express Forwarding (CEF) switching is a proprietary form of scalable switching intended to tackle the problems associated with demand caching. With CEF switching, the information which is conventionally stored in a route cache is split up over several data structures. The CEF code is able to maintain these data structures in the Gigabit Route Processor (GRP), and also in slave processors such as the line cards in the 12000 routers. The data structures that provide optimized lookup for efficient packet forwarding include:
The Forwarding Information Base (FIB) table – CEF uses a FIB to make IP destination prefix-based switching decisions. The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and these changes are reflected in the FIB. The FIB maintains next-hop address information based on the information in the IP routing table.
Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with switching paths such as fast switching and optimum switching.
Adjacency table – Nodes in the network are said to be adjacent if they can reach each other with a single hop across a link layer. In addition to the FIB, CEF uses adjacency tables to prepend Layer 2 addressing information. The adjacency table maintains Layer 2 next-hop addresses for all FIB entries.
CEF can be enabled in one of two modes:
Central CEF mode – When CEF mode is enabled, the CEF FIB and adjacency tables reside on the route processor, and the route processor performs the express forwarding. You can use CEF mode when line cards are not available for CEF switching, or when you need to use features not compatible with distributed CEF switching.
Distributed CEF (dCEF) mode – When dCEF is enabled, line cards maintain identical copies of the FIB and adjacency tables. The line cards can perform the express forwarding by themselves, relieving the main processor – Gigabit Route Processor (GRP) – of involvement in the switching operation. This is the only switching method available on the Cisco 12000 Series Router.
dCEF uses an Inter-Process Communication (IPC) mechanism to ensure synchronization of FIBs and adjacency tables on the route processor and line cards.
For more information about CEF switching, see Cisco Express Forwarding (CEF) White Paper.

NO.106 Which three methods does Cisco DNA Centre use to discover devices? (Choose three)

CDP

SNMP

LLDP

ping

NETCONF

a specified range of IP addresses

NO.107 Which method should an engineer use to deal with a long-standing contention issue between any two VMs on the same host?

Adjust the resource reservation limits

Live migrate the VM to another host

Reset the VM

Reset the host

NO.108 Which statement about a fabric access point is true?

It is in local mode an must be connected directly to the fabric border node.

It is in FlexConnect mode and must be connected directly to the fabric border node.

It is in local mode an must connected directly to the fabric edge switch.

It is in FlexConnect mode and must be connected directly to the fabric edge switch.

Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html

NO.109 Refer to the exhibit.

An engineer must create a configuration that executes the show run command and then terminates the session when user CCNP legs in. Which configuration change is required”

Add the access-class keyword to the username command

Add the access-class keyword to the aaa authentication command

Add the autocommand keyword to the username command

Add the autocommand keyword to the aaa authentication command

Explanation
The autocommand causes the specified command to be issued automatically after the user logs in. When the command is complete, the session is terminated. Because the command can be any length and can contain embedded spaces, commands using the autocommand keyword must be the last option on the line. In this specific question, we have to enter this line username CCNP autocommand show running-config.

Loading …