Pass Your Exam With 100% Verified AZ-700 Exam Questions [Q71-Q95]

NEW QUESTION 71
You have an Azure subscription that contains the public IP addresses shown in the following table.

You plan to deploy a NAT gateway named NAT1.
Which public IP addresses can be used as the public IP address for NAT1?

NEW QUESTION 72
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure application gateway that has Azure Web Application Firewall (WAF) enabled.
You configure the application gateway to direct traffic to the URL of the application gateway.
You attempt to access the URL and receive an HTTP 403 error. You view the diagnostics log and discover the following error.

You need to ensure that the URL is accessible through the application gateway.
Solution: You create a WAF policy exclusion request headers that contain 137.135.10.24.
Does this meet the goat?

NEW QUESTION 73
You have art Azure subscription.
You plan to deploy Azure Front Door with Azure Web Application Firewall (WAF).
You plan to implement custom rules and managed rules that meet the following requirements:
* Block malicious bots.
* Throttle client IP addresses that exceed 100 connections per minute.
You need to identify which Front Door SKU to configure, and which type of rule to configure for each requirement. The solution must minimize administrative effort and costs.
What should identify? To answer, drag the appropriate options to the correct targets. Each option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

NEW QUESTION 74
You have an Azure subscription that contains a single virtual network and a virtual network gateway.
You need to ensure that administrators can use Point-to-Site (P2S) VPN connections to access resources in the virtual network. The connections must be authenticated by Azure Active Directory (Azure AD).
What should you configure? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 75
You have an Azure application gateway.
You need to create a rewrite rule that will remove the origin port from the HTTP header of incoming requests that are being forwarded to the backend pool.
How should you configure each setting? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 76
You have an on-premises datacenter.
You have an Azure subscription that contains 10 virtual machines and a virtual network named VNe1l in the East US Azure region. The virtual machines are connected to VNet1 and replicate across three availability zones.
You need to connect the datacenter to VNetl1by using ExpressRoute. The solution must meet the following requirements:
* Maintain connectivity to the virtual machines if two availability zones fail.
* Support 1000-Mbps connections-
What should you include in the solution? To answer, select the appropriate options in the answer area. NOTE:
Each correct selection is worth one point.

NEW QUESTION 77
You have two Azure subscriptions named Subscription1 and Subscription2.
There are no connections between the virtual networks in two subscriptions.
You configure a private link service as shown in the privatelinkservice1 exhibit. (Click the privatelinkservice1 tab.)

You create a load balancer name in Subscription1 and configure the backend pool shown in the lb1 exhibit. (Click tie 1b1 tab.)

You create a private endpoint in Subscription2 as shown in the privateendpoint4 exhibit. (Click the privateendpoint4)

For each of the following statements, select YES if the statement is true. Otherwise. select No.

NEW QUESTION 78
You have an Azure subscription that contains the resources shown in the following table.

You need to ensure that the virtual machines can access storage1, storage2, and DB1 by using service endpoints.
What is the minimum number of service endpoints you should create?

NEW QUESTION 79
You have an Azure subscription that contains an Azure Front Door named FD1. FD1 is configured as shown in the following exhibit.

You need to enable Azure Private Link for FD1.
What should you do first?

NEW QUESTION 80
You need to configure GW1 to meet the network security requirements for the P2S VPN users.
Which Tunnel type should you select in the Point-to-site configuration settings of GW1?

NEW QUESTION 81
You have the Azure App Service app shown in the App Service exhibit.

The VNet Integration settings for as12 are configured as shown in the Vnet Integration exhibit.

The Private Endpoint connections settings for as12 are configured as shown in the Private Endpoint connections exhibit.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

NEW QUESTION 82
You configure a route table named RT1 that has the routes shown in the following table.

You have an Azure virtual network named Vnet1 that has the subnets shown in the following table.

You have the resources shown in the following table.

Vnet1 connects to an ExpressRoute circuit. The on-premises router advertises the following routes:
* 0.0.0.0/0
* 10.0.0.0/16
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.

NEW QUESTION 83
You have an Azure environment shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.
NOTE: Each correct selection is worth one point.

NEW QUESTION 84
Task 8
You need to ensure that the storage34280945 storage account will only accept connections from hosts on VNET1 See the Explanation below for step by step instructions.

NEW QUESTION 85
In which NSGs can you use ASG1 and to which virtual machine network interfaces can you associate ASG1?
To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 86
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

NEW QUESTION 87
You have the Azure load balancer shown in the Load Balancer exhibit.

LB2 has the backend pools shown in the Backend Pools exhibit.

You need to ensure that LB2 distributes traffic to all the members of VMSS1.
What should you do?

NEW QUESTION 88
You are planning an Azure Point-to-Site (P2S) VPN that will use OpenVPN.
Users will authenticate by using an on premises Active Directory domain.
Which additional service should you deploy to support the VPN authentication?

NEW QUESTION 89
You need to configure the default route in Vnet2 and Vnet3. The solution must meet the virtual networking requirements.
What should you use to configure the default route?

NEW QUESTION 90
You have an Azure Traffic Manager parent profile named TM1. TM1 has two child profiles named TM2 and TM3.
TM1 uses the performance traffic-routing method and has the endpoints shown in the following table.

TM2 uses the weighted traffic-routing method with MinChildEndpoint = 2 and has the endpoints shown in the following table.

TM3 uses priority traffic-routing method and has the endpoints shown in the following table.

The App2, App4, and App6 endpoints have a degraded monitoring status.
To which endpoint is traffic directed? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point

NEW QUESTION 91
You have an Azure Traffic Manager parent profile named TM1. TM1 has two child profiles named TM2 and TM3.
TM1 uses the performance traffic-routing method and has the endpoints shown in the following table.

TM2 uses the weighted traffic-routing method with MinChildEndpoint = 2 and has the endpoints shown in the following table.

TM3 uses priority traffic-routing method and has the endpoints shown in the following table.

The App2, App4, and App6 endpoints have a degraded monitoring status.
To which endpoint is traffic directed? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point

NEW QUESTION 92
Your company, named Contoso, Ltd, has an Azure subscription that contains the resources show in the following table.

You plan to deploy Azure Front Door. The solution must meet the following requirement:
* Requests to a URL of https://contoso.azurefd.net/uk must be routed to App1uk.
* Requests to a URL of https://contoso.azurefd.net/us must be routed to App1us.
* Requests to a URL of https://contoso.azurefd.net/images must be routed to the storage account closest to the user.
What is the minimum number of backend pools and routing rules you should create? To answer, the appropriate number to the correct component. Each number may be used once, more than once, or not at all. You may need to drag the spilt bar between panes scroll to view content:
Note: Each correct selection is worth one point.

NEW QUESTION 93
You need to implement name resolution for the cloud.liwareinc.com. The solution must meet the networking requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NEW QUESTION 94
SIMULATION
Task 2
You need to create an Azure Firewall instance named FW1 that meets the following requirements:
* Has an IP address from the address range of 10.1.255.0/24
* Uses a new Premium firewall policy named FW-pohcy1
* Routes traffic directly to the internet

NEW QUESTION 95
Azure virtual networks in the East US Azure region as shown in the following table.

The virtual networks are peered to one another. Each virtual network contains four subnets.
You plan to deploy a virtual machine named VM1 that will inspect and route traffic between all the subnets on both the virtual networks.
What is the minimum number of IP addresses that you must assign to VM1?